Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#632513 09/05/19 08:10 PM
Joined: Feb 2010
Posts: 381
Member
OP Offline
Member
Joined: Feb 2010
Posts: 381
I have customer (School) with a Alurtus System

Which is tied into the paging system

Working fine

They can type from there P.C. and it will come over the paging system

They are wondering when someone dials 911

All the phone beep

Can I have that come over the Alurtus System

This is kind of vague

Sorry

EMP & Lightning Home Surge Protection
EMP - Click Here!
teldata1 #632700 09/13/19 10:52 AM
Joined: Feb 2010
Posts: 381
Member
OP Offline
Member
Joined: Feb 2010
Posts: 381
OK

I have some more details on this

customer is looking for a relay closer when someone dials 911 ...They just need the closer and they will take it from there

I have been trying to think of a way by using an external relay someone mentioned a wheel lock relay

They have a PRI but there is 1 POTS Line that the system grabs when someone dial 911

I know this seems a little a bit odd but these Alertus systems and others like it are going to be pretty common

Thanks

JD

teldata1 #632701 09/13/19 12:40 PM
Joined: Sep 2004
Posts: 3,967
Member
*****
Offline
Member
*****
Joined: Sep 2004
Posts: 3,967

teldata1 #632703 09/13/19 01:27 PM
Joined: Aug 2012
Posts: 90
Member
Online Content
Member
Joined: Aug 2012
Posts: 90
Coral is right - get one of those from Viking and place it on an SLT port on the Aspire. Then in programming set that port to receive 911 notification. That should get you what you need.

teldata1 #632709 09/13/19 06:21 PM
Joined: Feb 2010
Posts: 381
Member
OP Offline
Member
Joined: Feb 2010
Posts: 381
How much do I owe you! ....

This should do the trick But wouldn’t I put this on the Analog Trunk
as opposed to a Analog station port

I believe the only thing that use that copper lines is for the 911

I guess if I could use an analog extension that would be good too it’s just I don’t really understand how to do the E911 notification on a Analog extension

I will have to look into that but I’m sure Copperline this is great


Thanks!






teldata1 #632718 09/14/19 04:30 AM
Joined: Aug 2012
Posts: 90
Member
Online Content
Member
Joined: Aug 2012
Posts: 90
I would definitely put this on the SLT rather than the CO line to prevent false alarms.

Test this first, but in the COS of the SLT port enable 20-08-16 (use a 1)
Then in system options set the alarm timer in 21-01-13. I would set it to the max of 64800 seconds.
Then when you want to disable the alarm you just dial 886.

Thanks,
Daniel

teldata1 #632730 09/15/19 02:33 PM
Joined: Feb 2010
Posts: 381
Member
OP Offline
Member
Joined: Feb 2010
Posts: 381
Can I use a single line extension to do this ? I am trying to set it up on my test bench

the multi button phones are working but not the single lines

teldata1 #632732 09/15/19 03:18 PM
Joined: Aug 2012
Posts: 90
Member
Online Content
Member
Joined: Aug 2012
Posts: 90
I will have to test it on my bench system. I have done it on the I-Series which the Aspire is based on but it may have changed. I'll have to double check and get back to you.

teldata1 #632737 09/15/19 08:57 PM
Joined: Feb 2010
Posts: 381
Member
OP Offline
Member
Joined: Feb 2010
Posts: 381
I was actually testing this on a SL 1100

I do have an aspire I should try doing it on that

I keep thinking they’re all the same


Moderated by  DrPbx, ttech 

Link Copied to Clipboard
Most Recent 5 Post
Summit 800 (9224 Phones) Solid Hold Light
by Keith Janssen - 01/25/21 09:42 PM
Outgoing ANI
by Andyreed - 01/24/21 02:52 PM
Fiber Equipment Installation
by dexman - 01/22/21 11:10 PM
8300 with UCB voicemail to email issue
by Rob Jordan - 01/22/21 06:45 PM
Power unit/interrupter issues
by Telephonemaven - 01/22/21 01:44 AM
Who's Online Now
33 members (Curlycord, nortelvoip, dexman, MooreTel, jeffmoss26, Touch Tone Tommy, justbill, JBean3329, bttirc, Keith Janssen, msnell, metelcom, jknichols, teletron, hitechcomm, morephones, jab1780, bdunne, sketchypro, diehard, Joe Talbot, nonameyet, MartinE, Scotty Woods, KRRath, Bob3470, nfcphoneman, grich, newtecky, skip555, pvj, Rob Jordan, Iwatsu Guru), 575 guests, and 62 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics94,196
Posts638,627
Members49,403
Most Online5,661
May 23rd, 2018
Today's Birthdays
dcttech, George/wa2vnv, telesalesrep
Newest Members
AleGor, Schreiber, RotoTech99, corkie, FixYaBrokeStuff
49,402 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
Top Posters (30 Days)
dexman 33
Yoda 19
Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Sold AD
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2021
Trusted Partners