| | Joined: Oct 2019 Posts: 1 Member | OP  Member Joined: Oct 2019 Posts: 1 | Afternoon all.
Found this site searching for answers. Curious if anyone has had any dealings with Comcast and their PRI delivered via a simple Arris 820, into an Adtran 908e?
Replacing old Panasonic PBX with a 9100. Can dial out, but rings busy dialing in.
Thanks in advance
Terry | | | | | Joined: Sep 2004 Posts: 3,966 Member |  Member Joined: Sep 2004 Posts: 3,966 | Literally have 100's of these on Comcast PRI's. Program the PRI and translation tables. Verify how many digits they are sending etc.
| | | | | Joined: Dec 2012 Posts: 246 Member | | Member Joined: Dec 2012 Posts: 246 | One tool within PC Pro that I have found helpful is the debug terminal. You can see the D-Channel information when a call comes in. You will either see the digits being sent by the carrier, or nothing if they are not sending the call your way. If the digits are not matching your programming then you can easily adjust programming and the DID tables to get incoming calls working.
Michael Meyer
| | | |
28 members (Coral Tech, Mercenary Roadie, hitechcomm, Professor Shadow, Yoda, Andyreed, Curlycord, nortelvoip, Touch Tone Tommy, phonman123, metelcom, paulw, JBean3329, Bob3470, telecom guy10, justbill, hbiss, dexman, dans, ChrisRR, dukane123, nfcphoneman, Ruben, pvj, Keyset6, Telephonemaven, KRRath, mongo5150),
584
guests, and
45
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums94 Topics94,185 Posts638,574 Members49,398 | | Most Online5,661
May 23rd, 2018 | | |
|
