|
|
|
|
Joined: Aug 2011
Posts: 374
Member
|
|
Member
Joined: Aug 2011
Posts: 374 |
Hi folks, I have a cix100 with the expanded cabinet. There are two mipu16 cards that are working fine but the milu24 in slot 7 isnt booting up. Watching the boot in hyperterminal it looks like it hangs at the second part. The arm portion?
I've tried reloading the database from the stored version as well as moving slots. I also swapped it into another ksu and it still wont come up. Sits there with the heartbeat light a solid red.
Is there a way to resurrect this puppy?
TIA
B
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
|
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
Is anything in slots 6 or 8 ? With a MIPU 24 the slot before and after have to be vacant
Last edited by Steve Mull; 10/21/19 11:54 AM.
|
|
|
|
|
Joined: Aug 2011
Posts: 374
Member
|
|
Member
Joined: Aug 2011
Posts: 374 |
The one before isnt and it was working fine. The one after was and still is vacant.
B
|
|
|
|
|
Joined: Jan 2010
Posts: 937 Likes: 5
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jan 2010
Posts: 937 Likes: 5 |
When you hook up a TTY cable and run Putty or Teamviewer what prompt are you given?
Does the card boot up correctly when compared to one that is working correctly?
Regards
Carl
|
|
|
|
|
Joined: Aug 2011
Posts: 374
Member
|
|
Member
Joined: Aug 2011
Posts: 374 |
I've been using hyperterminal..I can see the boot and watch it start over. If I interrupt the boot, I get the mipu command prompt.
|
|
|
|
Forums84
Topics94,516
Posts639,970
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
185
guests, and
45
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
