|
|
|
|
Joined: Apr 2014
Posts: 7
Member
|
OP
Member
Joined: Apr 2014
Posts: 7 |
I have a customer with a CIX100 and Strata Messaging. The phone lines are coming in on Coax from Rogers & then being converted with an Arris box to analog. If a caller lands in a mailbox & hangs up, neither the CIX or Messaging realizes the call has been disconnected, so there ends up being a 2 minute (120 second) message in the mailbox. The message contains the "fast busy tones" of a line that has been off hook and not released. I have asked the line provider if they can send the release signal & they are telling me they cannot.
Anyone have any suggestions on how to circumvent this on a CIX100??
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2010
Posts: 937 Likes: 2
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jan 2010
Posts: 937 Likes: 2 |
Get a decent ATA box that will send a disconnect to the CIX.
Or port the numbers to a SIP trunk provider and program the numbers directly on the CIX as SIP trunks and do away with the ATA box.
Regards
Carl
|
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
147
guests, and
383
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
