| | Joined: May 2008 Posts: 523 Member | OP  Member Joined: May 2008 Posts: 523 | Hello,
I got two SMT-5230s on eBay. They are loaded with SCME software:
i5230-SCME-V02.13
(2013.02.20 10:00)
i5230-SCME-V02.11
(2013.01.11 10:00)
No USB port on these phones.
Any bomb proof instructions on how to get these loaded with OfficeServ software?
Thanks | | | | | Joined: Jan 2007 Posts: 1,009 Member | | Member Joined: Jan 2007 Posts: 1,009 | I might be wrong, when you connect them to an officeserv and do the the set up on the phone it will ask what system SCME or I think OfficeServ is something odd like KPP anyway choose whatever isn't SCME and they should come up.
John 807
| | | | | Joined: May 2008 Posts: 523 Member | | OP Member Joined: May 2008 Posts: 523 | Nope, I need to upgrade the firmware to OfficeServ, it's on SCME SIP | | | | | Joined: Jun 2009 Posts: 61 Member | | Member Joined: Jun 2009 Posts: 61 | I've heard you have to send this into Samsung repair to get it switch back to OfficeServ. I have about 10 that I need to get switched back to OfficeServ if anyone has figured this out. | | | | | Joined: Oct 2007 Posts: 46 Member | | Member Joined: Oct 2007 Posts: 46 | I believe bretthaze is correct. I remember at least on the SMT.i6XXX phones, you can go from Officeserv to SCM, but not backwards - unless it goes to repair. | | | | | Joined: Nov 2013 Posts: 30 Member | | Member Joined: Nov 2013 Posts: 30 | if they say Officeserv on the plastic you can through TFTP.
i have swapped back and forth on models. | | | |
20 members (Curlycord, mbhydro, justbill, RATHER BE FISHING, hbiss, BobRobert, Mercenary Roadie, nortelvoip, dexman, Bob3470, Keyset6, OBT, hitechcomm, newtecky, Touch Tone Tommy, nonameyet, Ruben, Yoda, JBean3329, MooreTel),
187
guests, and
37
robots. | | Key: Admin,
Global Mod,
Mod | | | Forums94 Topics94,194 Posts638,614 Members49,401 | | Most Online5,661
May 23rd, 2018 | | |
|
