Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
NEC SV9100 PMS
#633854 11/20/19 11:28 PM
Joined: Sep 2017
Posts: 8
Member
OP Offline
Member
Joined: Sep 2017
Posts: 8
Ever integrate over IP with TimeShareWare PMS?
We're trying to set up the integration on a machine off site connected via VPN but they were expecting the NEC to be able to output the PMS data to an IP address. All that is available in the LUA is a port.
They are now building the interface on a local machine on the same LAN and we'll test again but I'm a little concerned about their side.
I took a look at their interface settings and these are the only types of PBX:

Alcatel
Avaya
Fujitsu
HCX5000
Iwatsu
Meridian
Mitel
NEAX2400
Tadrian

I saw no option for NEC SV9100, SV8100, SL2100, SL1100, or Aspire

Once they have the new interface up I'm wondering if I should change my protocol from KTSI w/ENQ to NEAX 60/90 and have them set to NEAX2400 and see what happens.

Re: NEC SV9100 PMS
Beerslayr #633855 11/20/19 11:51 PM
Joined: Sep 2004
Posts: 3,911
Member
*****
Offline
Member
*****
Joined: Sep 2004
Posts: 3,911
If anything it must be NEAX. Are you using the PMS interface?

https://www.hitecphonesystems.com.au/pdf/UNIVERGESV9100Hotel_MotelManualIssue1.0.pdf

Re: NEC SV9100 PMS
Beerslayr #633856 11/21/19 12:06 AM
Joined: Sep 2017
Posts: 8
Member
OP Offline
Member
Joined: Sep 2017
Posts: 8
Yeah we're using the LUA PMS API Converter 1.0.3. No more PVA card. Works excellent in our other deployments using IP to Serial converters

Re: NEC SV9100 PMS
Beerslayr #633864 11/21/19 11:35 PM
Joined: Sep 2017
Posts: 8
Member
OP Offline
Member
Joined: Sep 2017
Posts: 8
Well it worked right away once they had the interface built on a local machine and pointed to the PBX. Used HCX5000 as sub type in their config. Had to turn BCC to none because they were getting an error after the data swap but otherwise no issues using KTSI w/ENQ


Moderated by  DrPbx, ttech 

Link Copied to Clipboard
Forum Search
Most Recent 5 Post
Office server 100
by bditech - 08/13/20 05:50 PM
Definity support
by ALB300 - 08/13/20 01:53 PM
HELP toshiba DP5130-FSDL system compatability
by Duane F. - 08/12/20 09:57 PM
Common audible ringing question
by morephones - 08/12/20 07:03 AM
Remote ipoffice phone
by High Mesa Communications - 08/11/20 06:33 PM
Who's Online Now
27 members (Yoda, Avidcomm, Ruben, EV607797, justbill, hbiss, Noobed2336, newtecky, Touch Tone Tommy, Curlycord, KRRath, gelehu, RATHER BE FISHING, Carl Navarro, mongo5150, ECI Tech, bditech, BobRobert, metelcom, usedphones, Skunky, DonaldR, KX-T308, morephones, pvj, Professor Shadow, Mercenary Roadie), 462 guests, and 107 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics93,875
Posts636,823
Members49,330
Most Online5,661
May 23rd, 2018
Today's Birthdays
Abcomm, n1cn0c, nicnoc, reataylor
Newest Members
gertter, bmerri19, Henry VIII, jmontler, barryv
49329 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
dexman 40
DonaldR 21
hbiss 20
Ruben 18
Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners