Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
SL2100 Remote IP MLT Terminals #634776 01/21/20 11:45 AM
Joined: Jan 2018
Posts: 41
pete83uk Offline OP
Member
OP Offline
Member
Joined: Jan 2018
Posts: 41
Hi,

I have an SL2100 with 6 remote IP phones connected via a VPN. Calls into extensions at the site with the pbx work fine, as do external calls inbound and outbound

What we cannot do is make calls between extensions at the remote site, if we dial the extension we here the ringing dialtone but then when the extension picks up there is no audio and after 10 seconds the call is ended and the IP phone displays hang up

This is only happening on the internal calls between the extensions at the remote site,

In terms of the config for the phones they have

SIP 1st Server Address: internal IP of pbx
Access mode: Normal
SIP 1st Server Port 5080
NAT traverse Mode: Dynamic
WAN Mate IP: Internal IP of the PBX
WAN Mate Port: 5080

Could anybody let me know what may be going wrong?

NEC search for systems, cards, phones, software, manuals and repairs!
Re: SL2100 Remote IP MLT Terminals [Re: pete83uk] #634777 01/21/20 01:18 PM
Joined: Apr 2005
Posts: 2,322
dans Offline
Member
*****
Offline
Member
*****
Joined: Apr 2005
Posts: 2,322
Check your router settings at each location.


If you have an VPN there is not need to configure NAT, WAN settings.


We get old too soon, smart too late
Re: SL2100 Remote IP MLT Terminals [Re: pete83uk] #634791 01/22/20 12:38 PM
Joined: Dec 2008
Posts: 192
erniejoey Offline
Member
Offline
Member
Joined: Dec 2008
Posts: 192
Try turning off Peer to Peer for the IP phones in 15-05-50

Re: SL2100 Remote IP MLT Terminals [Re: pete83uk] #634805 01/22/20 11:00 PM
Joined: Jul 2015
Posts: 31
mreilly Offline
Member
Offline
Member
Joined: Jul 2015
Posts: 31
Do the phones have a CAP key on them?

Re: SL2100 Remote IP MLT Terminals [Re: pete83uk] #634812 01/23/20 03:27 PM
Joined: Sep 2004
Posts: 3,891
Coral Tech Online Content
Member
*****
Online Content
Member
*****
Joined: Sep 2004
Posts: 3,891
Ok first you are on a VPN you don't use NAT tranverse at all for those. Turn that off.

In 10-58 DEFINE your internal VPN network so everything is routed correctly and make sure everything is on the same subnet.

Re: SL2100 Remote IP MLT Terminals [Re: erniejoey] #634839 01/24/20 01:02 PM
Joined: Jan 2020
Posts: 5
obs_cy Offline
Member
Offline
Member
Joined: Jan 2020
Posts: 5
Originally Posted by erniejoey
Try turning off Peer to Peer for the IP phones in 15-05-50


This is the answer, I've run into this problem before and disabling peer to peer solved it.

Re: SL2100 Remote IP MLT Terminals [Re: obs_cy] #634850 01/24/20 07:11 PM
Joined: Oct 2004
Posts: 1,469
oobie Offline
Member
*****
Offline
Member
*****
Joined: Oct 2004
Posts: 1,469
Originally Posted by obs_cy
Originally Posted by erniejoey
Try turning off Peer to Peer for the IP phones in 15-05-50


This is the answer, I've run into this problem before and disabling peer to peer solved it.


But as CoralTech said you don't need NAT at all if he/she is using a VPN.

Re: SL2100 Remote IP MLT Terminals [Re: pete83uk] #634884 01/27/20 06:52 AM
Joined: Jan 2020
Posts: 5
obs_cy Offline
Member
Offline
Member
Joined: Jan 2020
Posts: 5
Peer to peer has nothing to do with nat afaik, It forces the calls to go through the pbx if it's off.
when it's on the remote phones try to establish a call session between them to save channel resources from the system but in my experience this always caused me audio problems.

Re: SL2100 Remote IP MLT Terminals [Re: pete83uk] #634910 01/28/20 08:50 PM
Joined: Jul 2011
Posts: 18
Johnny Luchador Offline
Member
Offline
Member
Joined: Jul 2011
Posts: 18
would PEER to PEER also explain why I have an audio talk path on an MLC Phone using NAT, but when on the local Wifi have no talk path at all?


Moderated by  DrPbx, ttech 

Search

Most Recent 5 Post
Wireless phone on 9100
by Yoda - 02/16/20 06:53 PM
Executone - Gateway K2100 system Operating Information
by usedphones - 02/16/20 05:17 AM
Merlin Magix R 1.0 911 problems
by Telesystems - 02/15/20 08:04 PM
Svmi20i no longer lighting msg waiting lamps
by John807 - 02/14/20 04:33 PM
Vodavi STSe Firmware Update Issues
by tech22 - 02/14/20 02:42 PM
Who's Online Now
35 registered members (pvj, pdxjim911, Bob3470, jeffmoss26, RATHER BE FISHING, Mercenary Roadie, justbill, C5Z, Ruben, newtecky, STS E, nfcphoneman, OBT, Tip&Ring, Curlycord, Yoda, usedphones, Professor Shadow, dexman, gelehu, Telesystems, Coral Tech, ffej010, Meyery2k, Not_sirius, nonameyet, BobRobert, ChrisNI, hbiss, Silversam, JBean3329, MooreTel, metelcom, steve2653, R4+Z), 392 guests, and 222 spiders.
Key: Admin, Global Mod, Mod
Popular Topics(Views)
Forum Statistics
Forums94
Topics93,432
Posts634,407
Members49,236
Most Online5,661
May 23rd, 2018
Today's Birthdays
alltelephonetim, jdamron, Joe McCormick, Sanjay, Stew Pididiot, Tim Hummer
Newest Members
EasternOffice Ma, OneCallTelecom, david.ralph, Amardeep, Palmer19
49236 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters(30 Days)
dexman 34
Jeroen 20
Ruben 17
OBT 16
pvj 14
RESPONSIVE WEBSITE DEVELOPMENT
Bluewater Sailing
Become a Patron! https://www.patreon.com/bePatron?u=5256033
Buy one Get one FREE when you use PayPal at checkout! Code T28P
Yealink $39.95 Buy one Get one FREE when you use PayPal on checkout! Code T28P
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners