Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#634961 01/30/20 05:08 PM
Joined: Jan 2020
Posts: 1
Member
OP Offline
Member
Joined: Jan 2020
Posts: 1
I have a CIX670 with 4 expansion cabinets. i have a 16port BWDKU in slot 1 of the 1st cabinet where ports 12-16 appear to be dead. i have pulled the card and put back in with no change. My question is can i buy a new BWDKU and just put it in the same slot and all configurations/extension remain or is that info stored within the card itself and the new card would appear as a new configured card?

Atcom VoIP Demo
VoIP Demo
Joined: Aug 2002
Posts: 4,918
Likes: 1
Administrator
Offline
Administrator
Joined: Aug 2002
Posts: 4,918
Likes: 1
Should be no problem. Before you go through all of that though I would reset the system then check to make sure you have enough licenses and make sure you have stations programmed correctly on those ports.

Joined: Jan 2010
Posts: 933
Likes: 1
Moderator-Toshiba
*****
Offline
Moderator-Toshiba
*****
Joined: Jan 2010
Posts: 933
Likes: 1
Power off the system and just swap it out and you will be fine the as programming is held in the CPU and not the BWDKU.



Regards
Carl
Joined: Apr 2014
Posts: 7
Member
Offline
Member
Joined: Apr 2014
Posts: 7
Have you verified that it isn't the amphenol? A faulty amphenol could cause the end ports to not function as well.


Moderated by  Carlos#1, phonemeister 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,740
Posts636,414
Members49,619
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
Today's Birthdays
Charles Duffy, Station Specialties
Newest Members
RockyTop, Homer Domer, Lane, AMS Technology C, Chrontel
49,618 Registered Users
Top Posters(30 Days)
jsaad 7
Toner 6
Who's Online Now
1 members (justbill), 105 guests, and 10 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: Business Phone Systems | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2022
Powered by UBB.threads™ PHP Forum Software 7.7.5