web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#63609 11/18/09 04:40 AM
Joined: Dec 2006
Posts: 93
Avit Offline OP
Member
OP Offline
Member
Joined: Dec 2006
Posts: 93
We have an AXXESS 256 CPC version 9.128. The embedded modem recently quit working. It has been in place and working for about 2 years. I replaced the CPC card and still the modem will not answer. The modem has a DID directed to it's extension,(1500), but when you call that number or dial 1500 internally the call goes to the attendant. The modem shows as enabled under devices\modems and there is an extension ID built for it. What else could keep the modem from picking up?

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#63610 11/18/09 07:37 PM
Joined: May 2007
Posts: 65
Member
Offline
Member
Joined: May 2007
Posts: 65
Avit,

Here are some things to try..


What kind of trunk the modem call is using on the Axxess side of the call.

What connection speed the modem is using. The speed can be programmed on the Axxess side also.

The default is to connect at the highest speed possible.

Try to reduce the modem speed in database programming to 9600, see if the call still fails.

Is the call a networking call? If so, then verify that the networking connection is NOT over IP.


Using a single line phone on a SLC go off-hook and listen for dial tone. If the handset plays dial tone, then the DSP is working properly.

Make an IC call from a standard 2-line display digital phone to any other phone. After audio is connected have the 2-line digital phone press digits on the keypad. If the user on the other end of the call hears DTMF digits, then the DSP is working correctly.

Ask the caller to connect the same originating modem to a SLC circuit and dial the modem x1500. Does the modem connect? If so, then the DSP is working correctly.

#63611 11/19/09 07:24 AM
Joined: May 2005
Posts: 526
Member
Offline
Member
Joined: May 2005
Posts: 526
I would try changing the modem extension number maybe remove it and replace it in DB programming. I really don't think the modem is the issue because the calls go to the attendant. If the modem was dead you would get dead air or maybe a reorder tone. I have never seen one go bad and where you replaced the card it isn't the modem for sure.
Randy

#63612 11/19/09 01:39 PM
Joined: Sep 2007
Posts: 1,173
Member
Offline
Member
Joined: Sep 2007
Posts: 1,173
If it still gives you fits try an external modem connected to serial.

Replaced the CPC? Not an easy task with the licensing and hassle - been there!

#63613 11/19/09 01:40 PM
Joined: Sep 2007
Posts: 1,173
Member
Offline
Member
Joined: Sep 2007
Posts: 1,173
I should have added that of course it would be just a simple port forward to get into via IP remotely.

#63614 01/07/10 01:39 AM
Joined: Sep 2005
Posts: 206
Member
Offline
Member
Joined: Sep 2005
Posts: 206
Call into the system through DISA and default all on the modem extension.


Moderated by  Stix1 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,697
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,112 Shoretel
187,717 CTX100 install
186,810 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 11
TDKs79 7
pvj 4
Who's Online Now
2 members (justbill, Curlycord), 55 guests, and 432 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5