Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
#636714 05/07/20 01:16 PM
Joined: Oct 2006
Posts: 1,318
Yoda Offline OP
Member
OP Offline
Member
Joined: Oct 2006
Posts: 1,318
SL1100 system with Normal POTS lines, except for one DIL line that rings extension 1103. Callers leave messages in 1103's mailbox.

The customer has trouble getting to his mailbox from home. I should be able to press # # and the extension number to login, but instead it sends me to the other line's DAT as if I pressed 1.

If I wait a couple seconds between key pressed, I eventually hear the canned voice say "enter a mailbox number". Then we're ok.

Thanks for any help.
Jim

Linked Banner to your Product or Website
Joined: Sep 2004
Posts: 3,975
Member
*****
Offline
Member
*****
Joined: Sep 2004
Posts: 3,975
I assume the AA picks up right? Should be # + ext number.

Joined: Oct 2006
Posts: 1,318
Yoda Offline OP
Member
OP Offline
Member
Joined: Oct 2006
Posts: 1,318
Agreed, would be # + ext if using AA. There is no AA for this department's line. This line is DIL no answer to 102, inMail, and goes to the subscriber mailbox for ext 1103. In that case, pressing ## +ext number should get to the mailbox login.

Joined: Sep 2004
Posts: 3,975
Member
*****
Offline
Member
*****
Joined: Sep 2004
Posts: 3,975
You understand what that is doing right? First # goes to AA the #+ext does login. So ya, there is a pause. You might need to flag on dialing option on the mailbox. Only other way is to send the call to an AA and then timeout (set to 1 sec) to REC2 to that destination mailbox.

Joined: Apr 2005
Posts: 2,416
Member
*****
Offline
Member
*****
Joined: Apr 2005
Posts: 2,416
Jim,

Regarding the mailbox assign to 1103 if you have dial option checked, what is assigned as the next call routing mailbox? Confirm what dial action table is assigned to this routing mailbox and make sure the # is setup as login.


We get old too soon, smart too late

Moderated by  ttech 

Link Copied to Clipboard
Advertising Sponsor
Most Recent 5 Post
24 VS 23 Gauge
by teldata1 - 04/09/21 10:28 AM
Bell System Central Office Rotation
by dexman - 04/09/21 01:30 AM
DSX 40 built in auto attendant
by dougster - 04/07/21 03:16 PM
SVMI-2 AND SVMI-2E
by dougster - 04/06/21 11:16 PM
Using and Servicing an SX-200 MX in 2021
by Societus - 04/02/21 11:18 PM
Popular Topics (Views)
Forum Statistics
Forums93
Topics94,340
Posts639,394
Members49,443
Most Online5,661
May 23rd, 2018
Today's Birthdays
jackie zhao, Margel, Thomas D Munro
Newest Members
Generoso, Flashy65, dv8inpp, Daniel Trentham, Societus
49,443 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
dexman 57
Ruben 17
jsaad 7
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Who's Online Now
16 members (jeffmoss26, nortelvoip, Professor Shadow, justbill, BobRobert, Curlycord, RATHER BE FISHING, ECI Tech, JBean3329, hitechcomm, MooreTel, Sandro, Mercenary Roadie, hbiss, dexman, jsaad), 110 guests, and 44 robots.
Key: Admin, Global Mod, Mod
Advertising Sponsor Spot 2
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2021
Trusted Partners