Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
CIX 670 Unresponsive ethernet port
#637087 06/08/20 03:08 PM
Joined: May 2019
Posts: 23
Member
OP Offline
Member
Joined: May 2019
Posts: 23
I have a CIX 670 which I believe has a dead ethernet port. It has an active link light when connecting it to a switch or directly to my laptop but I can not ping the IP address.

Anyone else have an issue like this?

EMP & Lightning Home Surge Protection
EMP - Click Here!
Re: CIX 670 Unresponsive ethernet port
iatech3800 #637088 06/08/20 05:08 PM
Joined: Jun 2005
Posts: 2,569
Member
Offline
Member
Joined: Jun 2005
Posts: 2,569
I have had some very old CIX100 processors that had some poor network connections, but typically I haven't seen the same issue with the CIX670. I have seen the admin part of the processor lock-up (unable to connect with eManager), but the processor would still respond to PINGs. Usually you will need to cycle power on the system to get it workings again. Toshiba did fix this in later firmware releases.

If it isn't pinging, then make sure that you know the IP address of the system (prg 916), and that your PC or laptop is within the same network range, and that you try different cords.

Re: CIX 670 Unresponsive ethernet port
newtecky #637104 06/09/20 02:22 PM
Joined: May 2019
Posts: 23
Member
OP Offline
Member
Joined: May 2019
Posts: 23
I ended up rebooting the system which brought it back to life. The voicemail wasn't working either due to the connection being down.
It's been working fine for years, it just recently started having ethernet issues. Seems more like a hardware issue possibly.

Last edited by iatech3800; 06/09/20 02:22 PM.
Re: CIX 670 Unresponsive ethernet port
iatech3800 #637112 06/09/20 09:25 PM
Joined: Jun 2005
Posts: 2,569
Member
Offline
Member
Joined: Jun 2005
Posts: 2,569
If it is that bug that causes the Stratagy ES or iES to lockup the processor, Toshiba finally fixed it on the latest 3.10 MK063 or on later 5.xX builds. I had a bunch of systems that locked up and required a reboot. Fun fact, looking at prg 916 would sometimes cause the system to reboot.


Moderated by  Carlos#1, phonemeister 

Link Copied to Clipboard
Most Recent 5 Post
7200 UCD Prompts
by ChrisNI - 10/31/20 12:58 PM
summit icm ring
by davetel - 10/31/20 03:28 AM
ISDN Caller ID relay
by MarcO Qc - 10/30/20 05:48 PM
SBI-145 Merdian Digital Centrex
by aarond2424 - 10/29/20 03:06 PM
nickname for cabling scraps? mongol?
by temp001 - 10/29/20 04:18 AM
Who's Online Now
17 members (justbill, Curlycord, RATHER BE FISHING, dexman, Touch Tone Tommy, nameless, mbhydro, Professor Shadow, Ruben, temp001, hitechcomm, hbiss, BobRobert, ChrisNI, metelcom, Yoda, Skunky), 163 guests, and 78 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics94,041
Posts637,712
Members49,371
Most Online5,661
May 23rd, 2018
Today's Birthdays
cglover, danaphone55, patrickc, Paul Elkins, slowly_drowning_in_IT, Wellco
Newest Members
temp001, DynaAdmin, Nickonicle, chelsea419, jsb15
49370 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
Top Posters (30 Days)
dexman 24
Toner 10
hbiss 10
Daniel 9
Ruben 9
Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Sold AD
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners