|
|
Joined: Dec 2008
Posts: 86
Member
|
Member
Joined: Dec 2008
Posts: 86 |
We have the Axxess V11 system. At times users report 'call going through the speaker on their IP set, but the call is between 2 different stations on the system'. The user can only listen to the conversation, they can not disconnect or join the call. The sets are ususally on the same card and in the same building. I was told to 'reset' the card P-out/p-in to fix the problem, but that didn't work and it is now getting worse. Could there be a 'timer' or 'flag' that should be checked. The last thing would be to replace the card.-I guess? Any help or info would be appreciated.
Say Bye.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Aug 2009
Posts: 41
Member
|
Member
Joined: Aug 2009
Posts: 41 |
Are the phones on a separate network or do they share the same network as your pc's?
|
|
|
|
Joined: Aug 2005
Posts: 908
Member
|
Member
Joined: Aug 2005
Posts: 908 |
This may be way out there but, are you using Contact Center Suite? Reporter Realtime allows monitoring and recording of agents. The person listening must program their extension into the program itself. If they have the wrong extension programmed into Realtime, and initiate a monitoring session, it will activate on the wrong extension.
|
|
|
|
Joined: Dec 2008
Posts: 86
Member
|
Member
Joined: Dec 2008
Posts: 86 |
They are on the same network. There are different 'scopes' for the different locations. ie courthouse, sub-courthouses etc. The sets that cross-connect are usually in the same building at the time the problem occurs.
Say Bye.
|
|
|
|
Joined: Dec 2008
Posts: 86
Member
|
Member
Joined: Dec 2008
Posts: 86 |
No we don't have any add-on software. A system power supply went bad and had to be replaced, not sure if that matters.
Say Bye.
|
|
|
|
Joined: Aug 2009
Posts: 41
Member
|
Member
Joined: Aug 2009
Posts: 41 |
Have you tried a full system reset? Not just the card? If not try that. There might be some corruption in the DB.
|
|
|
Forums84
Topics94,515
Posts639,961
Members49,847
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Dimension Seven),
265
guests, and
46
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|