| |
| | Joined: Oct 2008 Posts: 298 Member | OP  Member Joined: Oct 2008 Posts: 298 | I have a customer with four locations with SV9100s that are all interconnected with IP-CCIS. They are looking to switch to SIP trunks at the main site but be able for the other three sites to access them.
Incoming isn't a problem as the DIDs will route via the F-Route tables to the proper extensions.
Outgoing though is the concern. I'm sure it can be done but want to confirm that if a user at site B dials the trunk access code, that it can access the SIP trunks on site A to make an outgoing call. The end goal is to have everybody using the SIP trunks, aside for 911 calls that will use a local analog trunk at each location. | | | | | Joined: Sep 2004 Posts: 4,054 Member | | Member Joined: Sep 2004 Posts: 4,054 | If you are concerned I would order 1 and test it. It should work if all the networking is setup correctly. | | | | Forums84 Topics93,522 Posts635,351 Members49,569 | | Most Online5,661
May 23rd, 2018 | | |
1 members (Keyset6),
8
guests, and
9
robots. | | Key: Admin,
Global Mod,
Mod | | |
|
| |
