sundance-communications.com/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems System needs reboot for trunks to work

Anyone seeing this lately? We've been getting a few calls from customers cannot dial out (not breaking dial tone). Happens on 7100 and 7200 systems. Remote reboot clears the problem. Thanks.

i have seen this for years, the date and time shows the Year 2092. Reboot is the only remedy until it is on ver 5.01

I have this happening on 5.01 too....

Had another develop this issue again today. It is also running 5.01.

5.01 wasn't meant to be a stable release, it was meant to be the migration path to SCM. I refuse to put 5.01 on anything, I use 4.99 or 4.98, depending on the system.

hi,

I am interested in knowing what makes you think that V5.01 is not a stable release?

The V5.01 release notes show a host of new features and bug fixes, and in my neck of the woods, it has been successfully applied to hundreds of systems.

I've got this same issue with two 7100s- one is MP10 and the other MP10a. Happens mostly with the MP10 (4.46) but not as much -knock on wood- with the MP10a.
4trm and uni have been swapped. my next option is the processor. What's this about the year changing when this happens? I've never noticed that.
and yes it takes a reboot - remotely or on site to get them back.

The MP10 is on ATT Uverse lines.... the MP10a is on Spectrum lines... I have many 7100s on Spectrum lines and this doesn't happen. Not many customer on Uverse lines though.

Revisiting this issue. Still happening even with 5.03 software. Anyone still getting this. Thanks.