OfficeServ 100 CO lines wiring

Print Thread

Rate Thread

OfficeServ 100 CO lines wiring #640707 04/17/21 12:55 AM
Joined: Jul 2005 Posts: 146 Likes: 1 Florida dougster Member
dougster Member Joined: Jul 2005 Posts: 146 Likes: 1 Florida	Not sure if i am reading this correctly. the Manual Shows CO lines connecting to P2 Amphenol. The 6 trunk card is in Slot 3. Does that make Yellow-Orange the tip and ring. CO Trunk 13? When i try to put a button on a key for dt13, i get error tone right away. Do i need to enable the trunk somewhere? Thanks Doug

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: OfficeServ 100 CO lines wiring dougster #640708 04/17/21 01:06 AM
Joined: Jun 2006 Posts: 3,004 Likes: 4 Brisbane, Australia nameless Moderator-Samsung
nameless Moderator-Samsung Joined: Jun 2006 Posts: 3,004 Likes: 4 Brisbane, Australia	Trunk 13 key would be dt713. Assuming you have preinstalled the card and numbeted in it mmc724 What other trunk cards do you have in the system? I'm assuming 2 x 6trk 1 each in slot 1 and 2? Iirc pair 24 would be the first trunk I that card in that slot.

Re: OfficeServ 100 CO lines wiring dougster #640709 04/17/21 10:42 AM
Joined: Sep 2001 Posts: 2,360 Likes: 9 Canada pvj Moderator-Executone-Isoetec, Samsung
pvj Moderator-Executone-Isoetec, Samsung Joined: Sep 2001 Posts: 2,360 Likes: 9 Canada	Let's start by listing what cards you have and the slot order they are in. Basically, in the main cabinet the first amphenol will be the 8 built in digital ports on the motherboard and the various moh, page and auxillary connections. P2 will be 8 pairs for each slot so slot 3 will start at pair 17 which yes y/o .If that is the first co card then by default that would be trunk 1 or 701 in the dialling plan. y/g would be trunk 2 or 702

Re: OfficeServ 100 CO lines wiring dougster #640711 04/17/21 03:17 PM
Joined: Jul 2005 Posts: 146 Likes: 1 Florida dougster Member
dougster Member Joined: Jul 2005 Posts: 146 Likes: 1 Florida	That is what I was missing that it would be 701 even if the card was in the third slot... Thanks guys Doug I had 8 digital in slot 1 SVMi-4e in 2 6 CO card in 3 i changed 3 & 1 and reassigned them in 806. I will put them back and take system to office so i can watch the dialing strings on the port screen. for auto attendant routing.

Re: OfficeServ 100 CO lines wiring dougster #640712 04/17/21 03:19 PM
Joined: Jul 2005 Posts: 146 Likes: 1 Florida dougster Member
dougster Member Joined: Jul 2005 Posts: 146 Likes: 1 Florida	That is what I was missing that it would be 701 even if the card was in the third slot... Thanks guys Doug I had 8 digital in slot 1 SVMi-4e in 2 6 CO card in 3 i changed 3 & 1 and reassigned them in 806. I will put them back and take system to office so i can watch the dialing strings on the port screen. for auto attendant routing.

Re: OfficeServ 100 CO lines wiring dougster #640717 04/17/21 09:35 PM
Joined: Jul 2005 Posts: 146 Likes: 1 Florida dougster Member
dougster Member Joined: Jul 2005 Posts: 146 Likes: 1 Florida	Thanks that worked great.

Moderated by nameless, pvj

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems OfficeServ 100 CO lines wiring