Phone Systems

Sponsored by Atcom
Get a free phone!
Previous Thread
Next Thread
Print Thread
Rate Thread
#641081 06/29/21 03:57 PM
Joined: Aug 2002
Posts: 997
Likes: 1
jsaad Offline OP
Member
OP Offline
Member
Joined: Aug 2002
Posts: 997
Likes: 1
I am supposed to move a Nitsuko DS-2000 which I am certain is the same as the NEC DS2000. I have the NEC DS2000 software and the NEC DS2000 cable. I connect the cable and start up the software. I use the DS2000 password with 8N1 19200 and it never connects. Is it just the case of needing a reboot? Or is it different software altogether?

Atcom VoIP Demo
Get a VoIP Demo Today
jsaad #641082 06/29/21 05:30 PM
Joined: Feb 2015
Posts: 456
Likes: 1
Administrator
Offline
Administrator
Joined: Feb 2015
Posts: 456
Likes: 1
Just a quick google search I found.
From any display telephone:Press ICM + #*#* + Password + HOLD
.•The default system passwords are:Installer (level 3) = ******
System Administrator 2 (level 2) = ****
System Administrator 3 (level 1) = ****

Try those numbers.

https://www.pbxmechanic.com/manuals/nec/NEC%20DS2000%20(Nitsuko)%20Hardware%20and%20Software%20Manual.pdf

On this same manual the modem connection is
The remote PC must have a modem connected.
Also,the default communications parameters of the CPUserial port are 4800 8 N 1 (4800 baud, eight data bits,no parity and 1 stop bit).

Last edited by Professor Shadow; 06/29/21 08:37 PM. Reason: No passwords in the open fourm per rules.

There is no such thing as stupid questions.
Just stupid answers.
jsaad #641083 06/29/21 07:19 PM
Joined: Aug 2002
Posts: 997
Likes: 1
jsaad Offline OP
Member
OP Offline
Member
Joined: Aug 2002
Posts: 997
Likes: 1
Ok,I probably tried every speed except 4800. I will have to try again.

jsaad #641084 06/29/21 07:33 PM
Joined: Feb 2015
Posts: 456
Likes: 1
Administrator
Offline
Administrator
Joined: Feb 2015
Posts: 456
Likes: 1
FYI,
I am not a telecom tech but I have dealt with communication issues with security and building controls such as fire and HVAC..
All I can say is baud and parity and bits make a difference as well as the correct cable to connect with.

Assuming the front end will work to connect with.

Of course the last obstacle is, did someone change the default password?

I had some motorola paging terminals once that required hayes1200 baud modems ( non auto baud) to work.
They would not work with autobaud modems.
Try to find one even 10 years ago,


There is no such thing as stupid questions.
Just stupid answers.
jsaad #641123 07/08/21 11:55 PM
Joined: Aug 2002
Posts: 997
Likes: 1
jsaad Offline OP
Member
OP Offline
Member
Joined: Aug 2002
Posts: 997
Likes: 1
I tried every port speed and changed the speed in 0301 but did not work. No worries though. Thank you.

jsaad #641126 07/09/21 07:19 PM
Joined: Dec 2007
Posts: 6,731
Likes: 9
Retired Admin
*****
Offline
Retired Admin
*****
Joined: Dec 2007
Posts: 6,731
Likes: 9
According to the hardware manual the default parameters are: 4800-N-8-1

Remember this is an OLD system prior to Y2K...if you remember that.

https://manualzz.com/doc/10326088/nitsuko-ds-2000-hardware


Dean
Photographs:
https://www.instagram.com/deanwilsoncanby/
https://fstoppers.com/profile/deanwilsoncanby
https://www.facebook.com/Dean-Wilson-Photography-112841337020414

Please don't confuse your "Internet Search" with my licenses, certifications and over 30 years experience.

"Thank you for calling Technical Support. If you feel you have reached this number in error, please hang up and press redial."

Moderated by  JWRacedog 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics93,519
Posts635,345
Members49,569
Most Online5,661
May 23rd, 2018
Popular Topics (Views)
Today's Birthdays
kknight, Robinson Neidhardt
Newest Members
Implementing1A2, DLP, jaywin, dust0vich, Edward Clark
49,569 Registered Users
Top Posters (30 Days)
Toner 13
dexman 7
getcit 4
Who's Online Now
4 members (Curlycord, Carl Navarro, eos90066, Toner), 29 guests, and 12 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: VoIP Phones | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2022
Powered by UBB.threads™ PHP Forum Software 7.7.5