Visiplex

Print Thread

Rate Thread

Visiplex #641053 06/18/21 06:54 AM
Joined: Sep 2005 Posts: 9,289 Likes: 15 Maine, USA metelcom Admin
metelcom Admin Joined: Sep 2005 Posts: 9,289 Likes: 15 Maine, USA	Anyone here know much about Visiplex? I am having problems with WPRP-1 repeaters on a VS4810 master. Intermittent calls from wireless pendants. Merritt Business Telephones & Equipment + Commercial Audio/Video Products Commercial Communications . . . Turner, Maine If it was built after 1980 don't expect it to work right.

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: Visiplex metelcom #641100 07/02/21 11:40 AM
Joined: Dec 2010 Posts: 681 McAlester, OK Biztel Cuban Okie Tech Member
Biztel Cuban Okie Tech Member Joined: Dec 2010 Posts: 681 McAlester, OK	I have one of these systems installed. Have learned quite a bit from it. What troubles you having?

Re: Visiplex metelcom #641106 07/02/21 02:13 PM
Joined: Sep 2005 Posts: 9,289 Likes: 15 Maine, USA metelcom Admin
metelcom Admin Joined: Sep 2005 Posts: 9,289 Likes: 15 Maine, USA	Wireless devices are intermittent. Some times they will call pagers and sometimes they won't. Several devices do the same and does not matter where in facility they are. I have replaced repeaters but did not help. Just got a new 5100 system with external antenna receiver I hope that works. Merritt Business Telephones & Equipment + Commercial Audio/Video Products Commercial Communications . . . Turner, Maine If it was built after 1980 don't expect it to work right.

Re: Visiplex metelcom #641145 07/13/21 11:22 AM
Joined: Dec 2010 Posts: 681 McAlester, OK Biztel Cuban Okie Tech Member
Biztel Cuban Okie Tech Member Joined: Dec 2010 Posts: 681 McAlester, OK	I would suggest to check and make sure one of the repeaters isn't too close to the antenna. I had that give me an issue before. I take it this was working fine and then just started giving issues or has it always been giving issues?

Re: Visiplex metelcom #641151 07/13/21 06:17 PM
Joined: Sep 2005 Posts: 9,289 Likes: 15 Maine, USA metelcom Admin
metelcom Admin Joined: Sep 2005 Posts: 9,289 Likes: 15 Maine, USA	Worked fine for 5 years then this last year they did a renovation of the area where base station sets. The wireless receiver was knocked off the wall and a lot of cables damaged during renovation. I have had issues with the system ever since then. I hope I have a solution I am replacing the complete system. Merritt Business Telephones & Equipment + Commercial Audio/Video Products Commercial Communications . . . Turner, Maine If it was built after 1980 don't expect it to work right.

Moderated by metelcom

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums Wiring - Telecom Carriers - Trunks & Services Security, Alarms and Paging Visiplex