EMP & Lightning Home Surge Protection
EMP - Click Here!
Global Test Supply
Linked Banner to your Product or Website
eCommerce website for sale!
Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Jan 2021
Posts: 5
Member
OP Offline
Member
Joined: Jan 2021
Posts: 5
,An NEC DSX 40 & A Door King telephone entry intercom system. It is used at a gate to ring the house, some 3600 feet away, via a telephone line and a co port on a DSX 40. It rings a simple land line phone on the same line , but it will not ring the DSX 40 co port. There is noise on the line and a hum. The POTS uses old Ma Bell burial cable may be at least a cat 3.
I replaced a DSX 40 DSU, my first one, There was wiring from 3 past phone systems over 30 years. Several pairs were spliced here and there and changed colors 3 times from the gate to the house. There was an old Valcom door box and gate opener still hot from 20 years ago. As I installed the new DSU I I had to have one color CO wires and a CO line surge protector. After I did that the front door call box and the gate would not work. After a day and no use to me tech support, I found out that that was a use to be gate opener and call box. I removed it and a ring generator that looked like the pairs went into the house somewhere.
Ok so where I am at now is The Door King works fine except it will not ring the DSX40. It will ring the DSX 40 if you call the phone number. It will ring the DSX40 if I put my Butset on monitor, each time. But just normal it won't ring it. They said it use to ring it. It rings the cordless? It seems to me it just needs a little more HZ or & a little less noise. So I am thinking this this ring generator, Tellabs 8101 has something to do with it? I have never hooked one up though. I do not want to damage the DSU. I really need to get this thing working before the weekend is out. Places that I would call for support and possibly a small magic black box are usually closed Sat Sun. These people are going out of town for a month. They will not pay me until the Doorking rings the DSX40 throughout the house. I would appreciate anyone's help on this.

Brent

Last edited by Schreiber; 09/25/21 06:58 AM.
Global Test Supply 728x90
Joined: Dec 2005
Posts: 8,996
Spam Hunter
*****
Offline
Spam Hunter
*****
Joined: Dec 2005
Posts: 8,996
Moving topic to the NEC forum.


I Love FEATURE 00
Joined: Sep 2004
Posts: 3,984
Member
*****
Offline
Member
*****
Joined: Sep 2004
Posts: 3,984
Did you move to a different CO port on the KSU? Also, how long did you let it ring? It may be looking for Caller ID.


Moderated by  ttech 

Link Copied to Clipboard
Advertising Sponsor
Popular Topics (Views)
Forum Statistics
Forums94
Topics93,295
Posts634,127
Members49,497
Most Online5,661
May 23rd, 2018
Today's Birthdays
junkman, Tom J.
Newest Members
NZAndy101, spunkysam, tn00247167, Dave McCann, Mitel Hotel
49,496 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
Top Posters (30 Days)
dexman 10
Toner 6
Advertising Sponsor Spot 2
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Who's Online Now
23 members (pdxjim911, RATHER BE FISHING, hitechcomm, Yoda, Silversam, JBean3329, Tip&Ring, Carl Navarro, justbill, BCmitel, nfcphoneman, Ironhedz, Professor Shadow, nortelvoip, mongo5150, OBT, Ruben, sundance, Ben Holmes, EV607797, gelehu, Touch Tone Tommy, vicbob), 524 guests, and 48 robots.
Key: Admin, Global Mod, Mod
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2021
Trusted Partners
landing page builder Antiransomware 300x250 Your Business Phone Service in the Cloud