web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Apr 2007
Posts: 67
Member
Member
Joined: Apr 2007
Posts: 67
Hello Everybody,
I've been managing an IPK-1 system for about 12 years.
( IPK-I, pk192, R4.2sw, T1 DID, COI, 48 PBX stations, 48 SLI stations, Elite Mail )

It's an old system but it's been completely reliable and the staff is satisfied with it.
But we need caller ID and that requires moving from T1 to PRI.

Reviewing the manuals and some older threads, especially by "doghart", I have come up with this work list
of which I would greatly appreciate any comments or suggestions:

1) Must use MIFM-U20 ETU with KMM chip installed to capture caller ID numbers.

2) Must use PRI-U20 ETU on "newer" IPK systems.

3) Must remove COI trunks, evidently their presence in the system is not compatible with PRI.

4) Remove T1 ETU and replace with PRI ETU ( 7-1)

5) Delete the T1 trunk group, Build new, PRI trunk group:
Telco must provide PRI D channel on time slot 24
span type: b8zs ( 1.13.xx)
trunk type: WINK (3-14)
trunk type DID (3-91)
assign DID ( 1-1-20,21,22)

6) Set up CAP keys on the stations and remove any CO appearance keys. ( 4-12 )
Currently we are using both CAP and CO on the same phones.

Questions:
Since I'm going from T1 to PRI will the master clock source change ? (can't see why it would ...)
If the DID configuration is already programmed can it be reused with the PRI trunks?
Is there any way to have a COI trunk group with a PRI ? (Currently I have dial-8 for CO trunks, dial-9 for T1.)

Thanks for reading this.

-RH


Optimism is optionism.
Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Aug 2004
Posts: 1,732
Likes: 49
Admin
*****
Admin
*****
Joined: Aug 2004
Posts: 1,732
Likes: 49
Sorry you didn't get a reply from someone who knows NEC, but it looks like you've got it figured out!


[Linked Image from web.atcomsystems.ca]
Looking for a VoIP Phone Canada provider? Put Atcom's valuable VoIP expertise to work for your business today!
Joined: Feb 2005
Posts: 595
Likes: 4
Member
Member
Offline
Joined: Feb 2005
Posts: 595
Likes: 4
I don't think it's a case of no one answering as much as who would remember working on an IPK1 and putting PRI on one.

Joined: Feb 2005
Posts: 595
Likes: 4
Member
Member
Offline
Joined: Feb 2005
Posts: 595
Likes: 4
Hey not trying to be awkward but I recently was asked to reinstate SMDR on a 40 year old SDS and I was the only person willing to take this on! Yes I got it going but even I wouldn't attempt to get a PRI working on an IPK1!


Moderated by  ttech 

Link Copied to Clipboard
Newest Topics
Site Address back to Sundance-Communicati
ons

by Toner - 01/29/25 04:49 PM
Installing new digital card w/IP Phones now
by skippy3 - 01/23/25 03:21 PM
OHIO gets NG911...10 down, 78 to go.
by Carl Navarro - 01/23/25 01:49 PM
NEC SV9100 - SLT to elevator push button phone
by Bull Tone - 01/22/25 02:34 PM
Forum Statistics
Forums84
Topics94,470
Posts639,726
Members49,827
Most Online5,661
May 23rd, 2018
Newest Members
Yappalot, Rhys, Jstep223, AngelaTheSephira, Abdul Munna
49,827 Registered Users
Top Posters(30 Days)
Toner 12
dexman 5
Who's Online Now
2 members (justbill, RATHER BE FISHING), 398 guests, and 107 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2025
Powered by UBB.threads™ PHP Forum Software 8.0.0