|
|
Joined: May 2009
Posts: 7
Member
|
OP
Member
Joined: May 2009
Posts: 7 |
Axxess 8.1 Trying to setup a Phantom Extension to enable a # to route to a Voicemailbox, I cannot seem to find a way to create a phantom or Virtual phone to allow this. Is this possible on this version?
Thank you.
David
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jun 2010
Posts: 797
Moderator-Inter-Tel
|
Moderator-Inter-Tel
Joined: Jun 2010
Posts: 797 |
There are no phantom extensions in 8.1. You'll have to use an unused digital station port or single line port.
|
|
|
|
Joined: May 2009
Posts: 1,198
Member
|
Member
Joined: May 2009
Posts: 1,198 |
You should be able to create an MDPM phantom. Go to System / Cabinets / DKSC-16 and change one of the ports from Keyset to Keyset/MDPM. You can use the MDPM port as a phantom device.
Just watch that you don’t try to exceed the number of ports the CPC is licensed for.
|
|
|
|
Joined: May 2009
Posts: 7
Member
|
OP
Member
Joined: May 2009
Posts: 7 |
Thank you. I was afraid that was the case.
David
|
|
|
|
Joined: May 2005
Posts: 526
Member
|
Member
Joined: May 2005
Posts: 526 |
"to enable a # to route to a Voicemailbox" so why can't you just make # go to the mailbox? In the CRA change # to go to a mailbox in place of an ext and put in the mailbox number
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
149
guests, and
336
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|