|
|
|
|
Joined: Jun 2011
Posts: 19
Member
|
|
Member
Joined: Jun 2011
Posts: 19 |
This should be simple but I have an unused 8450 unit that our fron desk could use. i'm attaching it to an 8560 phone. remove the bootom cover of the phone and there's 2 rows of 15 pins and another single row of 7 pins. I'm assuming the phone can support 3 8450 units but I can't determine how the ribbon cable attaches. Also if I push it on the first set of 5 pins(2 rows), it will bend the pins next to it. Honestly I might be way off on all of this because I can't find instructions or a diagram anywhere. The pins look like this
...............
...............
end of cable has 2 rows of 5 pins
.....
.....
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2005
Posts: 91
Member
|
|
Member
Joined: Jun 2005
Posts: 91 |
Yes, all full DSS/BLF units need to connect to a PCDPM that you would install first on the station deskset.
If you install more than one DSS/BLF, they daisy-chain together in the cabling. In one side, out the other.
The mini-DSS/BLF units don't need this, and have a special connector on the station set.
|
|
|
|
Forums84
Topics94,557
Posts640,130
Members49,862
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
75
guests, and
105
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
