| | Joined: Oct 2001 Posts: 2 Member | OP  Member Joined: Oct 2001 Posts: 2 | Just bought a small office with what appears to be a "hybrid" partner system--No ACS Processor Module-but a 206-R4.1 and a 206E-R3.1. I bought a MLS12 Display, since the 4 handsets I have are ACSs without displays. I have been successful in programming system time and date, but the system recognizes only 1 of 2 incoming lines. When I try to program Number of Lines #104, it appears to "take" #10 and then "stops". Line Assignment #103 does the same.
Any suggestions/help would be greatly appreciated. Located in Somerset County, New Jersey and would be glad to find a reasonably-priced consultant. | | | | | Joined: Mar 2001 Posts: 338 Member | | Member Joined: Mar 2001 Posts: 338 | The 206 basic partner should see the lines when you power it up. Power the system down and wait a few minutes and power it back up. It automatic assign the lines depending on the number or line ports you have. Check out this link https://www.support.avaya.com/comsys/ they have all the options you can program on the basic partner. Hope this help [This message has been edited by dialtone (edited 10-06-2001).] | | | | Forums94 Topics93,271 Posts634,039 Members49,492 | | Most Online5,661
May 23rd, 2018 | | |
20 members (metelcom, sundance, Ruben, Coral Tech, BobRobert, jeffmoss26, justbill, hitechcomm, dukane123, BILL DEMMER, dexman, Pinecreekboy, Touch Tone Tommy, KRRath, gelehu, Silversam, Butch Cassidy, MooreTel, mongo5150, OBT),
475
guests, and
110
robots. | | Key: Admin,
Global Mod,
Mod | | |
|
