|
|
|
|
Joined: Oct 2001
Posts: 2
Member
|
OP
Member
Joined: Oct 2001
Posts: 2 |
Just bought a small office with what appears to be a "hybrid" partner system--No ACS Processor Module-but a 206-R4.1 and a 206E-R3.1. I bought a MLS12 Display, since the 4 handsets I have are ACSs without displays. I have been successful in programming system time and date, but the system recognizes only 1 of 2 incoming lines. When I try to program Number of Lines #104, it appears to "take" #10 and then "stops". Line Assignment #103 does the same.
Any suggestions/help would be greatly appreciated. Located in Somerset County, New Jersey and would be glad to find a reasonably-priced consultant.
|
|
|
|
|
Joined: Mar 2001
Posts: 338
Member
|
|
Member
Joined: Mar 2001
Posts: 338 |
The 206 basic partner should see the lines when you power it up. Power the system down and wait a few minutes and power it back up. It automatic assign the lines depending on the number or line ports you have. Check out this link https://www.support.avaya.com/comsys/ they have all the options you can program on the basic partner. Hope this help [This message has been edited by dialtone (edited 10-06-2001).]
|
|
|
|
Forums84
Topics94,282
Posts638,761
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
79
guests, and
124
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
