|
|
Joined: Jul 2002
Posts: 12
Member
|
|
Member
Joined: Jul 2002
Posts: 12 |
I have a Partner Mail VS 4Port/20Mailboxes Expansion card Comcode 107884363 When I put it in trhe system it light up my first twolines to red.. I am not surew if I am installing it right or what.. and not sure if it works or not. Can someone tellme if there is a setting you have to change for it or what?? and am what is the correct way to install it??
John
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
There is nothing special to installing it, you just put in the next unused slot and program it.You would program it as a 6 port card with the last four ports assigned to hunt group 7 in program #505. What slot is it in then we can tell you which ports to program. Also need to know what other cards are in the system.
[This message has been edited by dtmf (edited August 05, 2002).]
Russ runs a local service and private tech center. ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg) [/url]
|
|
|
|
|
Joined: Jul 2002
Posts: 12
Member
|
|
Member
Joined: Jul 2002
Posts: 12 |
I put it in today and when I set Hunt group 7 #505 for extensions 40 41 42 43 to 7 and had the card in it would always answer the system on the first ring and wouldn't play the day or night prompt. When I take it out the system works fine.
John
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
It sounds like you have some programming errors, What modules do you have in the system and what slots are they in, it sounds like you have some other ports already programmed to be voice mail. Let us know how your system is set up then we can pin point your problem.
[This message has been edited by dtmf (edited August 12, 2002).]
Russ runs a local service and private tech center. [/url]
|
|
|
|
|
Joined: Jul 2001
Posts: 3,347 Likes: 10
Moderator-Avaya-Lucent, Antique Tele
|
|
Moderator-Avaya-Lucent, Antique Tele
Joined: Jul 2001
Posts: 3,347 Likes: 10 |
"I have a Partner Mail VS 4Port/20Mailboxes Expansion card Comcode 107884363"
Are you talking about the PCMCIA card that goes into a Partner Mail VS R4 to increase the Port/Mailbox size? Do you have a currently working 2port/10mailbox VSr4, and want to increase the size? If so, you only need to program the tww ports before the exsisting ports into hunt group 7.
If you would post which processor you have, and a list of the cards and their slots, someone could determine which ports need to be programmed, and give you more complete instructions.
|
|
|
|
|
Joined: Jul 2002
Posts: 12
Member
|
|
Member
Joined: Jul 2002
Posts: 12 |
Ok I have a 5 Slot Carrier Looking at it from left to right
206 R4.1
206 R4.1
308R 1.0 ACS
Mail VS 4.1
That is what I have and the slot to the right is open.
John
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
With your system setup you need to program 32 33 34 35 in hunt group 7 (program #505) make sure that there is no others in that group.
Russ runs a local service and private tech center. [/url]
|
|
|
|
|
Joined: Jul 2002
Posts: 12
Member
|
|
Member
Joined: Jul 2002
Posts: 12 |
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Your welcome, if you have any more questions just let us know.
Russ runs a local service and private tech center. [/url]
|
|
|
|
Forums84
Topics94,543
Posts640,067
Members49,856
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
190
guests, and
23
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
