web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Joined: Oct 2002
Posts: 7
Member
Member
Offline
Joined: Oct 2002
Posts: 7
Original phones 2 - line ATT400
AND ATT200 , refurbished LUCENT 200
sent back from ATT repair.
No one knows what system this actually is
but I know it does not support music on
hold.
2 line in upto 6 stations out
box only says ATT Model 206
Problem: Phone works for about 10 minutes
then gives loud tone (like stuck key) every
time off-hook. Swapped out 3 different
phones same reseult.
Would appreciate any input.
Thanks,
PBS


[This message has been edited by sollon (edited October 31, 2002).]

Avaya IP Office Help & Support Website
IP Office Help

Avaya IP Office Help & Support Website


FAQs, documentation, videos, updates, and support for the Avaya IP Office business phone system!
Everything you need to know about installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.

Joined: Mar 2001
Posts: 338
Member
Member
Offline
Joined: Mar 2001
Posts: 338
Not familar with these phones. Describe your control unit. You refer to a legend 200; do you have a merlin legend. Is it only one ext. that you are having this trouble on?

[This message has been edited by dialtone (edited October 30, 2002).]

Joined: Mar 2001
Posts: 7,350
RIP Admin
*****
RIP Admin
*****
Offline
Joined: Mar 2001
Posts: 7,350
Are these buy chance two line phones that work with out a KSU? I also have never heard of them. If so then that would be your problem.


Russ runs a local service and private tech center.

[Linked Image from sundance-communications.com][/url]
Joined: Oct 2002
Posts: 7
Member
Member
Offline
Joined: Oct 2002
Posts: 7
Quote
<font face="Verdana, Arial" size="2">Originally posted by dtmf:
Are these buy chance two line phones that work with out a KSU? I also have never heard of them. If so then that would be your problem.</font>

These are all original equipment circa 1985
Each station has 4 wires from base unit
I always had only 2 stations.

Joined: Oct 2002
Posts: 7
Member
Member
Offline
Joined: Oct 2002
Posts: 7
Quote
<font face="Verdana, Arial" size="2">Originally posted by dialtone:
Not familar with these phones. Describe your control unit. You refer to a legend 200; do you have a merlin legend. Is it only one ext. that you are having this trouble on?

[This message has been edited by dialtone (edited October 30, 2002).]
</font>

I swapped phone from 2nd station to 1st
station so I could at least use the 2 lines
but now that phone has developed same problems.

Joined: Nov 2001
Posts: 1,640
Moderator-NEC
*****
Moderator-NEC
*****
Joined: Nov 2001
Posts: 1,640
It sounds like he has an old partner. He mentions 206 and a 200 and a 400 (all cards for a partner)
Does it look like this
<A HREF="https://mywebpages.comcast.net/donbaker13/partner206.gif">link</A>

[This message has been edited by ttech (edited November 01, 2002).]

Joined: Mar 2001
Posts: 7,350
RIP Admin
*****
RIP Admin
*****
Offline
Joined: Mar 2001
Posts: 7,350
Thats what I was thinking, If it is a 206 card and a 400 then change your phones to ports that are not being used and see if the problem happens there also. If it does then you might have a bad 206 module. Remember that the 400 and the 200 are for lines only not stations you will have to use spare ports on the bottom of the 206.

[This message has been edited by dtmf (edited November 01, 2002).]


Russ runs a local service and private tech center.

[Linked Image from sundance-communications.com][/url]
Joined: Oct 2002
Posts: 7
Member
Member
Offline
Joined: Oct 2002
Posts: 7
No, it does not look like that.
It is beige plastic box with MODEL 206
on back with barcode 97r151068954 104043328
Wall transformer is 110vac-25.4vac out.

Joined: Oct 2002
Posts: 7
Member
Member
Offline
Joined: Oct 2002
Posts: 7
Quote
<font face="Verdana, Arial" size="2">Originally posted by sollon:
No, it does not look like that.
It is beige plastic box with MODEL 206
on back with barcode 97r151068954 104043328
Wall transformer is 110vac-25.4vac out.
</font>
It only has 2 phone line outputs for single
lines.

Joined: Mar 2001
Posts: 7,350
RIP Admin
*****
RIP Admin
*****
Offline
Joined: Mar 2001
Posts: 7,350
I'm starting to wonder if it's a Merlin 206.
Do your phone look anything like this?
https://www.telbroker.com/product_details.asp?product_id=15


Russ runs a local service and private tech center.

[Linked Image from sundance-communications.com][/url]
Page 1 of 2 1 2

Link Copied to Clipboard
Newest Topics
NEC SV9100 trunk to trunk routing
by utec - 04/21/25 04:23 PM
CIX 100 Backup failing
by stwtech - 04/21/25 01:15 PM
SV8100 beeping
by Jackcmann - 04/10/25 05:29 AM
Forum Statistics
Forums84
Topics94,518
Posts639,984
Members49,850
Most Online5,661
May 23rd, 2018
Newest Members
ferhat_efe, utec, MoverDub, Kevin usama, Pruitt roger
49,850 Registered Users
Top Posters(30 Days)
Toner 9
Taddeo 6
Who's Online Now
0 members (), 226 guests, and 34 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2025
Powered by UBB.threads™ PHP Forum Software 8.0.0