|
|
|
|
Joined: Feb 2003
Posts: 6
Member
|
|
Member
Joined: Feb 2003
Posts: 6 |
I am curious, is there any way to find out the cause of the fault light on the Merlin II?
|
|
|
|
|
Joined: Dec 2002
Posts: 106
Member
|
|
Member
Joined: Dec 2002
Posts: 106 |
is the system presently working??? did you remove and cards with the power on??? backtrack your steps that lead to the fault light lighting... email me and I can help you.....I do alot of work on the old merlin dinosaurs... mitch taylor [email protected]
|
|
|
|
|
Joined: Mar 2002
Posts: 179
Member
|
|
Member
Joined: Mar 2002
Posts: 179 |
if your fault light is on that usually means the switch is dead. very rarely have I seen one still working when that light is on. I think it is a diode in the power supply. So long ago, I can't rememebr.
|
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
It actually indicates an alarm, but I would need to dig pretty deep in base archives to find my Merlin II manual. I have upgrade all of mine to Legends
|
|
|
|
|
Joined: Nov 2002
Posts: 131
Member
|
|
Member
Joined: Nov 2002
Posts: 131 |
The Merlin 11 came with the 517A5 Diagnostic module . It would plug into the front of the proc. module
|
|
|
|
|
Joined: Feb 2003
Posts: 6
Member
|
|
Member
Joined: Feb 2003
Posts: 6 |
Can you tell me more about the diagnostic module? I have never seen one. Is there a way to get one (since the Merlin is so old)? <font face="Verdana, Arial" size="2">Originally posted by Rudy:
The Merlin 11 came with the 517A5 Diagnostic module . It would plug into the front of the proc. module</font>
|
|
|
|
|
Joined: Nov 2002
Posts: 131
Member
|
|
Member
Joined: Nov 2002
Posts: 131 |
The 517A5 plugs into the connector inthe front of the proc. mod. It has a LED display on the front The Pec. code is 61389 and the com code is 103983524
|
|
|
|
|
Joined: Dec 2002
Posts: 106
Member
|
|
Member
Joined: Dec 2002
Posts: 106 |
MERLIN....check you email, I sent you some advice on resolving the fault light problem...let me know how things go... Mitch Taylor [email protected]
|
|
|
|
|
Joined: Dec 2002
Posts: 106
Member
|
|
Member
Joined: Dec 2002
Posts: 106 |
The fault light indicates that there is a problem with one of the circuit packs, Feature Module, Processor Module. Do you have any cards installed other then line/station cards? Are they all in use? Do you have multiple cabinets installed? Do you have an auxillary power supply installed? There are load limits that the system adheres to. Post the contents of all the cards in the system and I can go from there. Is there a TIE LINE cards installed? mitch taylor [email protected]
|
|
|
|
Forums84
Topics94,515
Posts639,961
Members49,847
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Toner, justbill),
211
guests, and
54
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
