sundance-communications.com/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems Need Magix help

I am working on an existing 3 carrier Legend that has been upgraded to a Magix. When the system was originally installed, whoever did it put the 100D module in the slot next to the processor. It operated fine with the old processor, however, now that it has been upgraded, we are having problems with all of the digital cards in the first carrier going down. I have always been told not to put a T1 card next to the processor for heat reasons. Has anyone else run into this type of scenario, and what was the fix?

All three cabinets have new power supplies, although I guess the one in the first cabinet could be bad. I swapped it with the one in cabinet 2 today, to see if we could isolate it there. Any ideas would be much appreciated.

i have always heard you need a station card in the first position or you will have problems, so i always do.

I build mine the same way, but we inherited this one. They are wanting to know that this is absolutely the problem, before we take them down to move and reprogram it.