|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
OP
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
I am having issues setting a PRI with Eschelon Telecom. Has anyone else setup a T-1 through them?
|
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
|
OP
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
can't seem to get any voice to go over the PRI. The d-channel is up, and I can grab trunks, get dial tone, and dial out, but then just dead air. Same on inbound. they can ring in and the caller ID even shows, but just dead air.
|
|
|
|
|
Joined: Feb 2003
Posts: 353
Member
|
|
Member
Joined: Feb 2003
Posts: 353 |
z, this makes me think the b channels assigned for service are not identical at the pbx and network provider. caller id is transported on the d channel. good luck.
HE SEEMS TO BE SAYING SOME KIND OF WORDS
|
|
|
|
|
Joined: Apr 2002
Posts: 646
Member
|
|
Member
Joined: Apr 2002
Posts: 646 |
Sounds like wrong protocol. Run a trace on the PRI group and look at the setup message. It will say unknown format if its wrong. Make sure they are set to AT&T custom.
|
|
|
|
|
Joined: Mar 2004
Posts: 253
Member
|
|
Member
Joined: Mar 2004
Posts: 253 |
hes right that happens when the protocol is mismatched.
|
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
|
OP
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
turned out to be a CLEC issue. They did not have the B channels configured correctly.
|
|
|
|
Forums84
Topics93,883
Posts637,025
Members49,675
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
