|
|
Joined: Aug 2003
Posts: 268
Member
|
|
Member
Joined: Aug 2003
Posts: 268 |
Is there a code to reset a Merlin Legend to default to a loop start Key system?
I got a call from a potential customer who inherited a Legend. All they need is 8 lines and 16 extensions plus VM. The system has Merlin Mail Release 3, and is outfitted with 5 408 cards.
That said, I have not worked with the Legend. Merlin II, Plus, Partner, Telrad, Norstar, Panasonic, NEC yes...but not Legend. I don't want to hand them to a competitor, but I don't want to look like an idiot because I don't know it. The manuals are there, and it seems like a fairly straightforward install.
M.
|
|
|
|
|
Joined: Sep 2004
Posts: 5
Member
|
|
Member
Joined: Sep 2004
Posts: 5 |
In programming go to System Programming - exit - System - Mode - change it to Key mode. This will make it a square config. You can assign the lines to the phone, etc... As far as a reset? I have not done that in a long time I will have to sleep on it.
|
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
Don't post specific reset steps in the open forum, use the installer forum or better yet email direct. For obvious reasons. Thanks.
Mark
|
|
|
|
|
Joined: Aug 2003
Posts: 268
Member
|
|
Member
Joined: Aug 2003
Posts: 268 |
Sorry about that Mark. I see the logic there though. I think at one time I tried to get into the installers forum, but wasn't allowed access. Are there additional credentials or another registration procedure to access that?
Mike
|
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
You have enough posts (25) I'll send you an email - mark
|
|
|
|
Forums84
Topics94,565
Posts640,175
Members49,868
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
27
guests, and
68
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
