|
Joined: Jan 2003
Posts: 54
Member
|
OP
Member
Joined: Jan 2003
Posts: 54 |
I added a new line to an 820 system and programmed to ring at all the necessary phones, but for some reason, one extension will not ring the new line, no matter what I do. I tried another phone, and it still won't ring the new line. The old lines ring just fine on this extension, so it's not the volume, or anything like that. Any thoughts?? ken
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
Member
Joined: Apr 2004
Posts: 4,991 |
DID YOU D TRY PROGRAMMING AT SET PROG SWITCH DOWN LIGHT LIGHT ON LINE /BACK TO NEUTRAL
[This message has been edited by KENB (edited October 12, 2004).]
|
|
|
|
Joined: Jan 2003
Posts: 54
Member
|
OP
Member
Joined: Jan 2003
Posts: 54 |
Yes, slid the T/P switch to P, touched the line button, dialed *37, slid switch back to center. As I say, I had no trouble with any other extension using this method
|
|
|
|
Joined: Sep 2004
Posts: 185
Member
|
Member
Joined: Sep 2004
Posts: 185 |
Can you try another exenstion port in the 820 and program the line ringing options the same? Maybe its something about this particular port. I've seen some of the old Merlin 820 and 410 ext. ports do weird things.
|
|
|
|
Joined: Jan 2003
Posts: 54
Member
|
OP
Member
Joined: Jan 2003
Posts: 54 |
I think that's the case. All other extensions program just fine. Maybe it's time for a new system?
|
|
|
Forums84
Topics93,884
Posts637,026
Members49,676
|
Most Online5,661 May 23rd, 2018
|
|
|
|