sundance-communications.com/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems Paging Output Problems

Page Pal info, try this link!
Links too big. The info your looking can be found on avayas web site.

[This message has been edited by jwooten (edited November 05, 2004).]

You need the page pal because you are using a trunk port from the Legend to interface. The page pal provides talk battery to the Legend, and the 600 ohm audio out to the paging equipment.

try this if you have a spare analog port on your system change it from a line port to a single line , change your page pal from ls to sa , then call your single line station to access paging , if your system keeps going down look somewhere at power or a bad module

Maybe, when you pluged in the new equip ,the extra load is giving you a power sag. Do you have a U.P.S.

First thing I would try is disconnect everything from the switch. If the problem still happens, it's in the switch. If not, start connecting one device at a time until the problem shows up.

if this only happens a few times a day and assuming that they page frequently
and you go to the power to the legend .
is it a dedicated outlet or is it sharing
power with something that effects the power
like in the kitchen or being impacted by
coffee pots etc
or since we have a season change ,heaters by desks,sump pumps /fans /copy machines
you know the drill
is the customer tinkers and did they try to install any radio shack devices

[This message has been edited by KENB (edited December 01, 2004).]

Thank you for everyones help they put a good UPS on the system and the problems went away. So it was a power problem. Now I am having a looping issue with the DFT120. I called Bogen and they were little help. Something is causing the same message to be replayed over and over until the system is unpluged. Any ideas?