sundance-communications.com/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems Merlin Legend

I changed out a 408 ATL with a 408 MLX module ,did a board renumber ,changed out my phones and rolled on to my next job, now I get a call that the voice mail is not picking up (Merlin legend mail 007 ) Any Ideas what I might look for. Thanks

Unfortunatly, the 408MLX card actually has 16 stations' worth of memory, so every extension after that card has shifted by 8 ports. If the 007 is the only card with stations after the new 408MLX, you can just remove the shifted ports from the calling group, and put the new ports back in. Check the 7th port of the 007, make sure that it doesn't have any lines assigned to it, as it's a modem.

If you have a bunch of station cards after the 408MLX that you changed out, put the 408ATL back in and restore from the PC card. Then either put the card in the last open slot (if you have slots available), or do a Print ALL, so you can see the stations and be prepared to reprogram them.