|
|
|
|
Joined: Jan 2005
Posts: 8
Member
|
|
Member
Joined: Jan 2005
Posts: 8 |
I have to move an extension to a new port because the a port on the board is bad. Is there an easy way to program this. it is an R7.0
|
|
|
|
|
Joined: Mar 2004
Posts: 253
Member
|
|
Member
Joined: Mar 2004
Posts: 253 |
the one and only way to do it is to renumber both ports starting with bad one to free up ext# for new one.
|
|
|
|
|
Joined: Jan 2005
Posts: 8
Member
|
|
Member
Joined: Jan 2005
Posts: 8 |
thanks....but can you tell me how to renumber a port?
|
|
|
|
|
Joined: Mar 2004
Posts: 253
Member
|
|
Member
Joined: Mar 2004
Posts: 253 |
menu system program, exit, sys renum, single, extention, put in old ext then hit enter then put in fake extention (i.e. 600 is usually free) then enter. then repeat and put ext.# of working port first then the old ext in.
|
|
|
|
Forums84
Topics94,524
Posts640,007
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
258
guests, and
36
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
