|
|
Joined: Oct 2004
Posts: 240
Member
|
|
Member
Joined: Oct 2004
Posts: 240 |
you can also locate a BTMI 113B interface unit goes from station port 4 pair to single line defice or you can locate Model Z187A1 which was a off premise module from the 1030 Merlin, which will both work for what you want to do
|
|
|
|
|
Joined: Dec 2002
Posts: 9,429 Likes: 3
Member
|
|
Member
Joined: Dec 2002
Posts: 9,429 Likes: 3 |
Good news-
I was at my dad's work today and I rescued a Merlin system from the trash! 3 BIS 10 phones, 4 BIS 5 phones, and a 410 control unit. Now I have something else to work on!
Jeff Moss
Moss Communications
Computer Repair-Networking-Cabling
MBSWWYPBX, JGAE
|
|
|
|
|
Joined: Jun 2001
Posts: 10,949
Moderator-Avaya
|
|
Moderator-Avaya
Joined: Jun 2001
Posts: 10,949 |
Are you going to take one of BIS 10's to the hardware?
Avaya SMB Authorized Business Partner. ACIS/APSS ESI Certified Reseller/Installer www.regal-comm.com
|
|
|
|
|
Joined: Dec 2002
Posts: 9,429 Likes: 3
Member
|
|
Member
Joined: Dec 2002
Posts: 9,429 Likes: 3 |
I probably will take one there.
I was working with the system tonight and did some wiring. I went from the ksu to a 66 block to a patch panel, but it didn't work. I might have miswired something, not too sure. I used the T568B color code. Was that incorrect?
Jeff Moss
Moss Communications
Computer Repair-Networking-Cabling
MBSWWYPBX, JGAE
|
|
|
|
|
Joined: May 2002
Posts: 17,747 Likes: 38
Member
|
|
Member
Joined: May 2002
Posts: 17,747 Likes: 38 |
Just pin for pin, so any wiring scheme will work as long as you're the same on both ends, it takes all 4 pairs, you can make it work with 3 but you won't have voice over the speaker when you dial a station.
Retired phone dude
|
|
|
|
|
Joined: Jan 2005
Posts: 15,405 Likes: 18
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,405 Likes: 18 |
Jeff:
Yes, the Merlin systems use 568B, but they will also work using 568A as long as it's the same on both ends of your cable run. It sounds to me like you may have 568A at one end and 568B at the other end. Just try transposing the white/orange and white/green pairs (at one end only) and see what happens.
Mike:
Jeff may have a 206. Did those support BIS phones? For some reason, I thought the only way they did was with a feature pack 1 added. It's been a long time since I messed with that system, plus I am an old geezer. They don't let me touch electrical things here in the "home".
:banana:
Ed Vaughn, MBSWWYPBX
|
|
|
|
|
Joined: Dec 2002
Posts: 9,429 Likes: 3
Member
|
|
Member
Joined: Dec 2002
Posts: 9,429 Likes: 3 |
This one is a 410 and it has a feature pack installed.
The one at work is a bigger control unit, don't know the model.
Thanks to all!
Jeff
Jeff Moss
Moss Communications
Computer Repair-Networking-Cabling
MBSWWYPBX, JGAE
|
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
|
Member
Joined: Apr 2004
Posts: 4,991 |
Jeff
you probably lost it going in and out of the block
as above if you put jacks 568a or b same
on both ends and use sta cords to cu and set
you should work
Same on one at work
If you want to play with what you have put a cat tester on your wires WITH OUT POWER FROM CU and it will show reversals.
Ed
merlin classics 206/410/820 bread box shaped
cu all needed fp1 or 2 for bis sets or monitor
speaker to work.
not needed with merlin plus or 1030/3070
|
|
|
|
|
Joined: Dec 2002
Posts: 9,429 Likes: 3
Member
|
|
Member
Joined: Dec 2002
Posts: 9,429 Likes: 3 |
Could I also just use patch cords from the jack to the phone?
Jeff Moss
Moss Communications
Computer Repair-Networking-Cabling
MBSWWYPBX, JGAE
|
|
|
|
|
Joined: May 2002
Posts: 17,747 Likes: 38
Member
|
|
Member
Joined: May 2002
Posts: 17,747 Likes: 38 |
Yes, as long as you use straight through cords.
Retired phone dude
|
|
|
|
Forums84
Topics94,543
Posts640,074
Members49,857
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
389
guests, and
38
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
