|
|
|
|
Joined: Jun 2004
Posts: 15
Member
|
|
Member
Joined: Jun 2004
Posts: 15 |
I am attempting to connect our Definity system to a PC to log the SMDR and try out Tapit before deciding whether to buy it or eCas.
My understanding is that I need an adapter to go from the Definity to my PC, but WHERE on the Definity do I hook the port up to? What is it labeled? Is it a DB25 or DB9 port?
I hate feeling so stupid! Any help would be appreciated and thanks in advance!
Guy
|
|
|
|
|
Joined: Apr 2005
Posts: 1,138
Member
|
|
Member
Joined: Apr 2005
Posts: 1,138 |
IMHO, Ecas is better.
Need more info.
What software version? Clan card?
What media gateway are you using?
|
|
|
|
|
Joined: Jun 2005
Posts: 3
Member
|
|
Member
Joined: Jun 2005
Posts: 3 |
In the Definity, enter change sys cdr. You have to tell the system where to output. If EIA, then there is a 25 pin connector on the back of the system. If you want to locate the CAS farther away, you will have to define and attach a data module on a digital port, then tell the system to output the cdr to the data module. EIA is the easier obviously.
|
|
|
|
Forums84
Topics94,525
Posts640,011
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
111
guests, and
39
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image from phototiki.com]](http://www.phototiki.com/images/user/sack/2009/05/cb70c1b7199119be2a64411aeaf58325ac0729d4.jpg)