sundance-communications.com/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems Definity Audix

I have a Definity Audix working in a Prologic cabinet, the audix is giving me a alarm that says Thermal code 3. I can not find any documents on how to clear this alarm. Has anyone run into this ?
Thank You for your help,
Nick

I need to see the entire page of "disp ala"

AUDIX Active Alarms: wA Thresholds: none Logins: 1
display alarms
ALARM REPORT

Resource Location Alm Fault Ack? Date/Time Date/Time Resolve
Type Lvl Code Alarmed Resolved Reason
TAPE 01A1501 WRN 5 n 07/14/06 17:28
TAPE 01A1501 WRN 6 n 07/14/06 17:28
THERMAL 01A15 WRN 3 n 07/14/06 17:23


enter command:


Here is the alarm page, Thanks for your help.
Nick

These answers are right from the docs. I wasn't sure what software version you have so I went off of 3.2.

The thermal warning is due to the tempature.

1. Make sure your Definity audix is not in the C carrier. If so, move it.
2. Make sure the room is not to hot.
3. Check the fan in the switch.
4. Check the air filter for blockage.

Tape warning 5 is a dirty tape.

Remove old, add new, 'add tape', 'save nightly', 'save weekly'.

Tape warning 6 is dirty tape heads.

Solution clean tape heads.

Thanks for your help
Nick