sundance-communications.com/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems PagePac Plus6 And IP Office

Is an Old PagePac Plus6 Compatible with an IP Office,If so is the Upam necessary ,And How would you wire it,The instructions they had ,Appeared to be a seperate system ,using CO Lines,and single line phones.Please help :confused:

Check your mail Gene, sent you the doc, as for if it will work on the IP office, I have never tried it.Perhaps others have and will pop in.

Thanks,Russ! I sent you an IM ,By the way how is the fund going.Will the Mitel thing help or hurt.I hope you are doing well.I have allways thought Inter-Tel was a rip off for the enduser.

What are you trying to accomplish? I do have an IPO using the pagePac for a ringing group (or paging group. I have a site with 2 buildings and 2 night bell groups and 2 paging groups. I use a comb. of a UPAM and the PagePal.

Yes,.....I would use a UPAM with the PagePac and you should be good to go.

Thanks for all the help guys,I'll let you know the outcome, Thanks again

Sent you another PM Gene.

FYI,Update,I got it going ,the pagepac plus six doesn't require the Upam,because it is an independant unit with it's own power supply,I plugged in my buttset to the system port on the pagePac ,dialed the correct code,and there it was,So I plugged it into a CO line port ,designated it Dial8, So you dial 8 pause for PagePac tone then dial zone,Example 7 is all call ,So 8P7,can designate button,or speed dial.Thanks for the help,I wanted to report back.Thanks again