web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#85340 06/22/07 07:10 AM
Joined: Oct 2005
Posts: 105
Member
Member
Offline
Joined: Oct 2005
Posts: 105
Does anyone know if VS mail 5.0 is compatible with an ACS R7 or not. Thanks

Avaya IP Office Help & Support Website
IP Office Help

Avaya IP Office Help & Support Website


FAQs, documentation, videos, updates, and support for the Avaya IP Office business phone system!
Everything you need to know about installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.

#85341 06/22/07 07:25 AM
Joined: Dec 2005
Posts: 9,181
Likes: 9
Spam Hunter
*****
Spam Hunter
*****
Joined: Dec 2005
Posts: 9,181
Likes: 9
It is, but in order for the DND function to operate properly, a patch needs to be applied using an R6 processor.


I Love FEATURE 00
#85342 06/22/07 08:57 AM
Joined: Oct 2005
Posts: 105
Member
Member
Offline
Joined: Oct 2005
Posts: 105
ok well I keep having a problem with the VM not picking up when the phone rings and I was told by someone that the VS5.0 is not compatible with a ACS R.7 So I figured checking here was the way to go cause I was under the impression that it would work fine with an R7

#85343 06/22/07 04:10 PM
Joined: Jul 2001
Posts: 3,347
Likes: 10
Moderator-Avaya-Lucent, Antique Tele
*****
Moderator-Avaya-Lucent, Antique Tele
*****
Joined: Jul 2001
Posts: 3,347
Likes: 10
Dex is right, it will work just fine except for the DND issue. (just installed one today, new R7 processor, reused customer's VSR5, no DND buttons so no conflicts)

Describe your problems in more detail, and be sure that ONLY and ALL your voice mail ports are in Hunt Group 7

#85344 06/22/07 06:22 PM
Joined: Feb 2007
Posts: 2,473
Member
Member
Offline
Joined: Feb 2007
Posts: 2,473
Check out Com.#310 for VM coverege.

#85345 06/23/07 09:26 AM
Joined: Jul 2001
Posts: 3,347
Likes: 10
Moderator-Avaya-Lucent, Antique Tele
*****
Moderator-Avaya-Lucent, Antique Tele
*****
Joined: Jul 2001
Posts: 3,347
Likes: 10
Vad, it doesn't affect the VSR5 and ACSR7 issue. When you are in DND, the R7 sends mode codes that the VSR5 doesn't understand, so you get "Your call is being transferred to the Receptionist", and it goes to Ext. 10. Even worse is if Ext. 10 is also in DND, then you have an endless loop of ring, "Your call is being transferred", ring, lather, rinse, repeat

#85346 06/23/07 09:42 AM
Joined: Oct 2005
Posts: 105
Member
Member
Offline
Joined: Oct 2005
Posts: 105
The DND will never be an issue so I'm ok there. As I treid to explain Tom, it usually picks up on the second ring "hello and tahnks for calling" etc. but sometimes it just rings and rings and goes no where. I power cycle the cabinet and it works fine again. The hunt group is they way it should be. The VS5 is a 5.0.15 version and someone mentioned to me that it won't work unless it's a 5.0.21 version and another guy said it won't work at all. I asked why is that and he said you would have to ask AVAYA directly why. So basically he has no clue.

#85347 06/23/07 11:32 AM
Joined: Jul 2001
Posts: 3,347
Likes: 10
Moderator-Avaya-Lucent, Antique Tele
*****
Moderator-Avaya-Lucent, Antique Tele
*****
Joined: Jul 2001
Posts: 3,347
Likes: 10
I would put an Auto Intercom button for each of the voice mail ports on an extension, and watch them as the system takes calls, and especially when it won't take calls, to see if the ports are already in use, locked up, or just ignoring the calls.

#85348 06/23/07 11:35 AM
Joined: Dec 2005
Posts: 9,181
Likes: 9
Spam Hunter
*****
Spam Hunter
*****
Joined: Dec 2005
Posts: 9,181
Likes: 9
Is it possible that the hard drive is on the way out?

If the voicemail ports were locking up, that would prevent calls from being answered. You could program autodial buttons for each of the voicemail extension to see if they are behaving properly.

(Whoops, TTT posted just before I did. laugh )


I Love FEATURE 00
#85349 06/23/07 03:55 PM
Joined: Nov 2001
Posts: 1,640
Moderator-NEC
*****
Moderator-NEC
*****
Joined: Nov 2001
Posts: 1,640
I had a problem where people would call in to get their messages doing a *7 and logging in. When they completed their call they would just hang up. It would lock up the port, later if they tried to call in or check their messages at a system phone it would say that they are already logged in too. I had to tell the customer they MUST dial **9 to exit when checking messages remotely and I have not had a problem since.
I realize it is not something you are really experiencing but it is one of those quirks to keep in back of your mind because you may run into is someday.

Page 1 of 2 1 2

Link Copied to Clipboard
Newest Topics
IPOFFICE 500
by Not_sirius - 05/20/25 08:15 PM
cat 6 cabling failed to certifiy
by jacktel - 05/18/25 05:55 AM
Inter-Tel Axxess - Change IP's?
by alphagsc - 05/14/25 08:18 PM
Identify a 1980's reception console
by Toner - 05/08/25 01:02 PM
Forum Statistics
Forums84
Topics94,529
Posts640,030
Members49,852
Most Online5,661
May 23rd, 2018
Newest Members
Marcgyver, DEN2MM, ferhat_efe, utec, MoverDub
49,852 Registered Users
Top Posters(30 Days)
Toner 5
hbiss 4
dexman 2
Who's Online Now
0 members (), 193 guests, and 60 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2025
Powered by UBB.threads™ PHP Forum Software 8.0.0