sundance-communications.com/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems four digit dial

I'm working on a magix and I wanna create four digit dial between two sites.Ie. when someone presses 5*** the system dials a designated string of numbers with the wild cards at the end of the string.pauses might also be a factor. similar to destination codes on mics or remote call forward on a definity.

I don't work on a Magix but a Definity. I would expect that your sites are tied together already? You would create the dialing ability in your dial codes and routing table.

I'm sure someone with Magix can help you better.

they are not tied both have individual pri lines. I know how to do it on a definity with phantom ext. but not on magix

You're going to want a point-to-point T1 between sites, then it's pretty simple to set up "networking" with a uniform dialing plan.

Go to https://support.avaya.com and download the LEGEND Network Reference.

here's what i wanna do. customer dials 5124 ect. then the system dials 212 555 1234 PPP 5124, mics is capable of doing this. is there any way of doing this on the magix. point to point is out the question. they are only gonna be there for six months

Ah, yes you can create phantom extensions out of unused adjuncts, then RCF them to the outside number. Since you are on PRI's, transferring calls will still have good sound quality, and use 2 channels during the duration of the call.

PM me if you need specifics on how to set it up.

thanks tommy thats the exact info I needed. In the past I've actually told customers that it couldn't be done. some tech probably came out ther and made me look like a donkey (just to keep it pg 13). thanks again