sundance-communications.com/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems MAGIX R4 V7... cannot assign 30 to 770

Wont allow me in SPM and as well as the LD set I get the "hell no" beep.

I am going to disconnect the newley installed 408 card, renumber board, restore file. Hopefully if this allows me to add 30 to 770 I can re-install the 408, renumber, and all will be well.

Basically since I have installed this card nobody is going to VM. Yes, all ext. w/ MB's are assigned to cover group 30.

Print your calling groups, and see if Cover Group 30 is assigned to a different calling group.

I did that and it was not. Im all good though and heres what I had to do.

Removed the 408 card from slot 04. Board renumber. Restore backup from 6/30. Check cover groups. 30 and 770 were now assigned to each tother. Add 408 to slot 04 again.

This got me back to ground zero and I made changes from here i.e. delayed rings etc...

Thanks for all the help TTT.