|
|
|
|
Joined: Oct 2008
Posts: 21
Member
|
|
Member
Joined: Oct 2008
Posts: 21 |
Tried using Programming software V 8.0.0.4
on an ACS R3.0 PC modem direct to Ext.76.
Call completes...handshake....no request for password...after 18 seconds, disconnect. Have tried multiple modem setting adjustments...no change. Using Dell Inspiron running XP, SP3.
Any ideas? Meanwhile, what to change from key to
hybrid....can't remember how on ACS. Want to make line group buttons on multiple 6D's....help appreciated!!!!!
PS>>>>>Password is programmed!
|
|
|
|
|
Joined: Jul 2001
Posts: 3,347 Likes: 10
Moderator-Avaya-Lucent, Antique Tele
|
|
Moderator-Avaya-Lucent, Antique Tele
Joined: Jul 2001
Posts: 3,347 Likes: 10 |
Try a different modem, perhaps an external Sportster. This is the frustrating part of remote programming ACS's, which is why they added a serial Admin port on the R7 and R8.
For the Hybrid mode, see "Mode of Operation" #198 on page 4-50 (pg. 146/466 of the pdf.)
|
|
|
|
|
Joined: Feb 2005
Posts: 12,359 Likes: 4
Member
|
|
Member
Joined: Feb 2005
Posts: 12,359 Likes: 4 |
What Tommy says. It's all in what modem you use and most "win modems" won't work. I use an external US Robotics connected to the COM port and never have a problem.
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
|
Joined: Oct 2008
Posts: 21
Member
|
|
Member
Joined: Oct 2008
Posts: 21 |
|
|
|
|
Forums84
Topics94,552
Posts640,109
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
55
guests, and
171
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
