|
|
Joined: Sep 2009
Posts: 10
Member
|
OP
Member
Joined: Sep 2009
Posts: 10 |
My current Merlin Legend is out of Digital ports, I need to add a cabinet. I have the cabinet and the Digital card. I want to know if the card needs to be a in a specific slot for the new cabinet and I need to know if the switch needs to be programmed to recognize that card.
unylinx
|
|
|
|
|
Joined: Sep 2005
Posts: 38
Member
|
|
Member
Joined: Sep 2005
Posts: 38 |
Just power down system, attach new expansion cabinet, and install MLX card in first slot to the right of power supply card. When system comes back up, it should recognize the new card; but I like to do a board renumber just to be on the safe side.
|
|
|
|
|
Joined: Sep 2009
Posts: 10
Member
|
|
OP
Member
Joined: Sep 2009
Posts: 10 |
I will try that thank you very much.
unylinx
|
|
|
|
|
Joined: Jul 2001
Posts: 3,344 Likes: 10
Moderator-Avaya-Lucent, Antique Tele
|
Moderator-Avaya-Lucent, Antique Tele
Joined: Jul 2001
Posts: 3,344 Likes: 10 |
May I add, back up your current programming to the PCMCIA card before you start, I've had stupid thing happen like a board renumber take out T1 programming!
|
|
|
|
|
Joined: Sep 2005
Posts: 38
Member
|
|
Member
Joined: Sep 2005
Posts: 38 |
TTT brings up a good point...also I forgot to mention when powering back up to turn on expansion carrier power first, then main cabinet.
|
|
|
|
|
Joined: Sep 2009
Posts: 10
Member
|
|
OP
Member
Joined: Sep 2009
Posts: 10 |
Wow you guys are amazing that worked like a charm. Now I am reading the manual trying to program the phones to make outboud calls. I will try use the feature that gives you the option to copy extension (a working extension). Since I have pre programmed extensions that work.
unylinx
|
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Yoda),
185
guests, and
349
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
