|
|
|
|
Joined: Aug 2006
Posts: 287
Member
|
|
Member
Joined: Aug 2006
Posts: 287 |
I have a customer who has a large network spread over several sites across the uk. the network addresses are ***.***.155.1 & ***.***.161.1
The system is on 161.50, I can ping it locally and all is ok, however i cannot ping it from 155.1. I can ping 161.100 (laptop) from 155.1 and vise versa.
I can use manager from 161.100 but not 155.1, any ideas
|
|
|
|
|
Joined: Nov 2005
Posts: 828
Member
|
|
Member
Joined: Nov 2005
Posts: 828 |
Do you have a correct IP route built on PBX to get back to originating subnet?
|
|
|
|
|
Joined: Aug 2006
Posts: 287
Member
|
|
Member
Joined: Aug 2006
Posts: 287 |
I have not done much with ip routes. What do I need to enter in the ip route table?
|
|
|
|
|
Joined: Nov 2005
Posts: 828
Member
|
|
Member
Joined: Nov 2005
Posts: 828 |
Umm...
***.***.155.0 as address along with the appropriate gateway and interface. Have you inquired with the installing Business Partner?
|
|
|
|
|
Joined: Dec 2006
Posts: 810
Member
|
|
Member
Joined: Dec 2006
Posts: 810 |
Also, does the customer have the routes built on their side to connect the 2 networks?
Pat Austin Teleco Inc. Product Manager/Sales Engineer Adtran ATSP TCTE/CTP Certified Teleco Homepage
|
|
|
|
|
Joined: May 2004
Posts: 1,668 Likes: 4
Moderator-Avaya
|
|
Moderator-Avaya
Joined: May 2004
Posts: 1,668 Likes: 4 |
If you can ping your laptop on the subnets, then the router is routing.
Yes, you will need a route like:
***.***.155.0
255.255.255.0
***.***.161.X
LAN1 (assuming that is the LAN port that you are connected to.)
Where "X" is the gateway IP of that subnet.
|
|
|
|
Forums84
Topics94,526
Posts640,017
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
395
guests, and
58
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
