web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Joined: Dec 2006
Posts: 108
FdTech Offline OP
Member
OP Offline
Member
Joined: Dec 2006
Posts: 108
We have an IP Office system that is about 3 years old. Since it's install it has had intermitent problems with disconnect supervision.

It happens most times on an outgoing call but can also happen when the attendant has mutiple incomming lines ringing at the same time and a caller hangs up without being answered.

Most times I will find a line showing on the monitor as being in a DISC but still showing time runing. It will hang there forever, pulling the bridging clips should provide a disconnect but it does not. When called from the outside the hung line sounds like it is ringing but it is not in the IP Office (it can be answered with a buttset at the terminal)

Times when it hangs on mutiple incoming calls the attendants station will continue to ring and can only be stoped by rebooting the system.

Tech support has never been able to duplicate the condition and wants us to leave it hung till they respond. Wish I could do that but we are a Fire Department Dispatch office and I cannot have an incoming line disabled for any length of time.

This started out happening about once a month when it was first installed and has been geting worse (3 times this week)

Nothing in the system has changed since the install, the Dispatch position (attendant) does not even have Voice Mail (VM Pro). It's a simple system.

Any Ideas, is this a common IP Office problem?

Avaya IP Office Help & Support Website
IP Office Help

Avaya IP Office Help & Support Website


FAQs, documentation, videos, updates, and support for the Avaya IP Office business phone system!
Everything you need to know about installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.

Joined: Feb 2007
Posts: 2,473
Member
Offline
Member
Joined: Feb 2007
Posts: 2,473
Usually it is not a telephone system problem. Most of the time it is Provider(Verizon) or IP lines. Call telephone company and let them know.

Joined: Dec 2006
Posts: 108
FdTech Offline OP
Member
OP Offline
Member
Joined: Dec 2006
Posts: 108
It would look like a verizon disconnect problem on the surface but.

I have verifyed that the loop current drops to 0 for about 500ms when the outside caller hangs up first. Have also pulled the bridging clips on a hung line to simulate a verizon disconnect and the IP Office ignores it. The disconnect time in IP Office is set at 200ms and has been tryed at lower settings without any change.

Joined: Feb 2007
Posts: 2,473
Member
Offline
Member
Joined: Feb 2007
Posts: 2,473
Go to Lines set up in the Manager and make sure that Line Disconnect Clear option is clicked.

Joined: Dec 2006
Posts: 108
FdTech Offline OP
Member
OP Offline
Member
Joined: Dec 2006
Posts: 108
Disconnect clear is checked.
What a fun day this has been, 50 to 60mph winds the FD has had over 150 calls today and I have rebooted this thing 4 times to unlock a ringing line.

Joined: Jan 2009
Posts: 79
vit Offline
Member
Offline
Member
Joined: Jan 2009
Posts: 79
I suggest you look into you trunk wiring from dmarc to ip office. Replace that and make sure you dont have other devices using that line. You have a short somewhere.


Infrastructure cabling specialists, Avaya Certified Techs
www.Aaa-avad.com
www.ivdsonline.com
Joined: Dec 2006
Posts: 108
FdTech Offline OP
Member
OP Offline
Member
Joined: Dec 2006
Posts: 108
Wiring from the Verizon demarc to the system consists of 3 year old 25 pair straight from the demarc to the patch panel located in the IP Office rack. It's in much better shape than Verizon's outside plant.

I hate the term SHORT, If I had a short tip to ring I would have a dead line. If tip or ring was shorted to ground or another pair I would have a hum.

I do not see this as a line problem as when it hangs you can pull the bridging clips (should look like a disconnect to IP Office) and the line remains hung

Joined: Jul 2001
Posts: 3,341
Likes: 10
Moderator-Avaya-Lucent, Antique Tele
*****
Offline
Moderator-Avaya-Lucent, Antique Tele
*****
Joined: Jul 2001
Posts: 3,341
Likes: 10
It's not a common problem. Who is the Business Partner that you work with? What is the equipment, the releases, the firmware version you are running? Have you opened a ticket with Avaya (or Catalyst or Jenne)? Have you changed the Analog options on the lines? Is it always the same line? Have you frogged the lines? Have you swapped hardware?

Joined: Nov 2009
Posts: 21
Member
Offline
Member
Joined: Nov 2009
Posts: 21
What is the current release the IPO is currently ON, I faced this issue when the system was ON 3.XX release and was able to fix it in 4.X release...

Check the Hardware where the trunk lines gets terminated and the trunk configuration settings if it is an PSTN line..

Try to upgrade the server to latest release if you are on a very older release...

Joined: Jan 2009
Posts: 79
vit Offline
Member
Offline
Member
Joined: Jan 2009
Posts: 79
Trunk might be crossed with another trunk.
Try CSS's solution as step 1.
Throw trunk on another feed pair. Replace line cord. Then if you have a problem bother Verizon about disconnect supervision.
Call us we are in NY if you need proffesional help.


Infrastructure cabling specialists, Avaya Certified Techs
www.Aaa-avad.com
www.ivdsonline.com
Page 1 of 2 1 2

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,693
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,096 Shoretel
187,702 CTX100 install
186,790 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
pvj 4
Who's Online Now
0 members (), 117 guests, and 228 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5