web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Mar 2005
Posts: 55
Member
Member
Offline
Joined: Mar 2005
Posts: 55
Magix System. This is the condition. Existing Call Group "2655" with 7 extensions and a loud bell. Incoming DID group call is answered, placed on hold, the requested person fails to pick up the line and the call sits there. According to the client the boss was holding for 15minutes at least and the call didn't go ring back, and only the person who answered the call had a flashing light. I expect he didn't hear the abbreviated ringing right? I turned it off so it should ring like a new call correct?

I checked the settings as follows: Mgmt Call Pickup Group 1 with 4 stations, 2nd Call Pickup Group with the employee stations, Call Group 2655 with the same stations as Pickup group 2. Abbreviate ringing ON.

How can I go about ensuring that the calls ring back. I am not sure what timer I should be checking. CampOn is for hold/transfer, TransfRetrn is not it. A 2nd problem was that mgrs couldn't pickup the call I expect that is because they weren't in the Call Pickup group 2, I added CallPickUp Group 1 to the Group 2 stations. Should I teach them to use a CampOn button to transfer the call to the desired person or can I at least ensure that the call on hold come back to whomever answered it and how should I do that? If I activate DLC for the supervisor would the call go to him after an extended period of ringing or hold?
Thanks for any input.

Avaya IP Office Help & Support Website
IP Office Help

Avaya IP Office Help & Support Website


FAQs, documentation, videos, updates, and support for the Avaya IP Office business phone system!
Everything you need to know about installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.

Joined: Jan 2004
Posts: 515
RIP Moderator
RIP Moderator
Offline
Joined: Jan 2004
Posts: 515
I don't think they are using the system correctly.

Why not have the person who receives the call just transfer it to the requested person?

It will go to that extension, and if not answered, to their Voice Mail Box.

Or am I missing something here?


RULE NUMBER 2, "THINKIN' WON'T GET IT, YOU GOTTA KNOW!" RULE NUMBER 3, if you need TIER-3 SUPPORT on a LEGEND or MAGIX, go to http://home.comcast.net/~merlinman -
Joined: Mar 2005
Posts: 55
Member
Member
Offline
Joined: Mar 2005
Posts: 55
I agree. This has been in place for many years. I think it probably is a problem that was magnified because its the owners call that was ignored. I created a CAMP On button and will instruct them that they will have to transfer the call, etc. but I want to make sure the situation with the forgotton call is less likely to occur again. It is a noisy car dealer repair center and probably they don't hear the beeping from a call on hold. How does the call behave if I remove the abbreviated ringing? Would it ring like a new call?


Link Copied to Clipboard
Newest Topics
NEC SV9100 trunk to trunk routing
by utec - 04/21/25 04:23 PM
CIX 100 Backup failing
by stwtech - 04/21/25 01:15 PM
SV8100 beeping
by Jackcmann - 04/10/25 05:29 AM
Forum Statistics
Forums84
Topics94,518
Posts639,984
Members49,850
Most Online5,661
May 23rd, 2018
Newest Members
ferhat_efe, utec, MoverDub, Kevin usama, Pruitt roger
49,850 Registered Users
Top Posters(30 Days)
Toner 9
Taddeo 6
Who's Online Now
0 members (), 224 guests, and 35 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998 - 2025
Powered by UBB.threads™ PHP Forum Software 8.0.0