sundance-communications.com/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems Merlin LEGEND: How do I enable POTs

Hello,

I'm mostly a complete Avaya noob and I need to add some more POTs lines to our system. We have a number of existing lines, little to no documentation on the initial setup, and now I need to add 4 more lines for inbound/outbound calls. Our board setup info is below. From what I've read I'm hoping that this will be somewhat easy, but I cannot for the life of me figure it out after looking thru WinSPM / sys program...

I want to add new 4 POTs lines to the 016 MLX-U card in slot 11. This board was just added a few months ago and has only been used for stations until now.

Merlin LEGEND Release 7.0 v10.0
Mode: Hybrid/PBX

Processor: CKE4 v02
Slot 1: 008 MLX
Slot 2: 408 GS/LS
Slot 3: 008
Slot 4: 008
Slot 5: 008
Slot 6: 800 GS/LS
Slot 7: 012
Slot 8: 008 OPT
Slot 9: 408
Slot 10: 012
Slot 11: 016 MLX-U

Any help greatly appreciated.
Thanks

The 016 card is for 0 lines and 16 telephones.

You have the capability of 16 outside lines on your system. The 408 in slot 2, the 800 in slot 6, and the 408 in slot 9.

You may be using a line for Music On Hold interface, and another line for Loudspeaker Paging

It's not exactly straight-forward to add lines to a Legend, so you may want to find a qualified local technician to work with.


.