web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Apr 2011
Posts: 3
jenyus Offline OP
Member
OP Offline
Member
Joined: Apr 2011
Posts: 3
Hello all!
So we usually don't mess with phones if we can help it but we decided to tackle a job.
Heres the specs on the system:
Lucent Partner 206E Module R4.1 (x2, slots 1 and 2)
Avaya Partner ACS PROC. R3.0 (slot 3)
Lucent Partner Mail VS v5.0 (slot 4)

8 lines total (1 fax, 1 for credit card reader, 6 voice)

We ran new lines in the building, but moved the avaya boxes and punch down block without changing any wiring on the punch down block or changing extensions on the lucent boxes. We didn't drop any phone lines but we did drop a couple of extensions. Now when a number is busy, when someone calls that number, it either just rings, throws a busy signal or comes back with "All circuits are busy blah blah blah".

We're at a loss since we've never dealt with this gear before.

we've tried reprogramming hunt groups and a couple other things but to no avail. does anyone have any ideas? we're reaching our whits end and need to get the project wrapped up.

Thanks!

Avaya IP Office Help & Support Website
IP Office Help

Avaya IP Office Help & Support Website


FAQs, documentation, videos, updates, and support for the Avaya IP Office business phone system!
Everything you need to know about installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.

Joined: Feb 2009
Posts: 3,136
Moderator-Vodavi, Vertical, XBlue
*****
Offline
Moderator-Vodavi, Vertical, XBlue
*****
Joined: Feb 2009
Posts: 3,136
Don't just jump to a conclusion that the system is doing this. "All circuits are busy?" Thats a TelCo intercept. Disconnect the lines from the system and I'll bet you still get the recording and quite possibly all the conditions you are reporting. Call each of the lines and see what condition each one has. That's where I would start.


- Dave S. -

You can never appease your ideologue opponents.

Joined: Apr 2011
Posts: 3
jenyus Offline OP
Member
OP Offline
Member
Joined: Apr 2011
Posts: 3
hey youre right! its doing the exact same thing. i called ATT and they said it wasn't their problem, but i guess i just need to talk to someone who knows a little bit more. thanks!

Joined: Apr 2011
Posts: 3
jenyus Offline OP
Member
OP Offline
Member
Joined: Apr 2011
Posts: 3
well ATT admitted their error and said the lines need call waiting to hunt properly, but we have to wait until monday to get the account info. ill let you know if it worked! thanks a lot!

Joined: Jun 2001
Posts: 10,949
Moderator-Avaya
*****
Offline
Moderator-Avaya
*****
Joined: Jun 2001
Posts: 10,949
Quote
Originally posted by jenyus:
well ATT admitted their error and said the lines need call waiting to hunt properly
Ummmmm that doesn't sound good.
You don't want call waiting on your lines, just hunt and/or rollover.


Avaya SMB Authorized Business Partner. ACIS/APSS
ESI Certified Reseller/Installer
www.regal-comm.com
Joined: Aug 2002
Posts: 2,608
Moderator-ESI, Shoretel
***
Offline
Moderator-ESI, Shoretel
***
Joined: Aug 2002
Posts: 2,608
Quote
Originally posted by jenyus:
we've tried reprogramming hunt groups and a couple other things but to no avail. does anyone have any ideas? we're reaching our whits end and need to get the project wrapped up.

Thanks!
Tell us what you did to try and program the hunt groups and we'll take it from there....

Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
*****
Offline
RIP Moderator-Nisuko-Tie, General
*****
Joined: Jan 2004
Posts: 6,648
is this actually AT&T or are you using that as a generic term to refer to the dial tone provider ?


dial tone from the cable company maybe ?

in any case like Mike said call waiting isn't what your your looking for

just a thought here you are so far over your head your customer would be better served at this point if you called in someone knowledgeable to finish this up and get everything working properly


Skip
------------------------------------

Serving SW and West central Fl since 1984
Joined: Apr 2004
Posts: 4,991
Member
*****
Offline
Member
*****
Joined: Apr 2004
Posts: 4,991
Further to Skips comment ,although this sounds like a problem with your provider,theres a link above to installers and California installers ,Take a look and there may be a local tech that can get you over this issue .

Also they could get you going with any program changes.


Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,693
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,703 CTX100 install
186,792 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
Who's Online Now
1 members (Curlycord), 103 guests, and 246 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5