atcomsystems.ca/forum
Posted By: kevhawk13 Legend SLT transfer offsite - 03/11/08 07:05 PM
Legend R7
What is the procedure to transfer a call to an outside number from an analog station? I'm answering an incoming call, flash, dialing 9 and the outside number, flash,(all parties are connected) and hanging up. The call disconnects. Am I missing or adding a step?
Posted By: mdaniel Re: Legend SLT transfer offsite - 03/11/08 08:10 PM
PM Sent
Posted By: kevhawk13 Re: Legend SLT transfer offsite - 03/11/08 08:13 PM
Michael I didn't get it. Please resend or e-mail me at [email protected]. Thanks!
Posted By: Touch Tone Tommy Re: Legend SLT transfer offsite - 03/11/08 09:39 PM
Bottom line, you CAN'T transfer to an outside number from a S/L phone on a Legend or Magix.

However, if you always transfer to the same number, you can set up a phantom extension number that is forwarded to the outside number, and transfer to that extension instead.
Posted By: kevhawk13 Re: Legend SLT transfer offsite - 03/12/08 05:26 AM
Thanks TTT. Can an SLT be forwarded to an offsite number?
Posted By: merlinman Re: Legend SLT transfer offsite - 03/12/08 05:45 AM
Yes, you must give it Remote Forward capability though.


Once that's set up, the forwarding is done like this:

OFF HOOK, Dail #33, Dial 9 and then the NUMBER and then press # again.

You should hear a confirmation tone at that point.
Posted By: kevhawk13 Re: Legend SLT transfer offsite - 03/12/08 05:48 AM
Thanks!
Posted By: kevhawk13 Re: Legend SLT transfer offsite - 03/14/08 03:23 PM
Merlinman,
It worked like a charm, though I found the code is *33.
© Sundance Business VOIP Telephone Help