atcomsystems.ca/forum Forums Other TDM Phone Systems Sprint - Tadiran Telephones & Systems Voice mail "message waiting" feature key amnesia

If this is on just one keyset then you can check the correct button code on a keyset that works fine.

The procedure for checking a button on a display set is:

1. Keyset is idle or in use on a call.
2. Press the Function key and then dial # 3.
3. Press designated feature key you wish to view.

The code for the working key will either be

• F64
• DIR XXX

Once you have the correct code then you can program F64 by:

1. Keyset is idle or in use on a call.
2. Press the Function key and then dial # 3.
3. Press designated feature key to which to program feature.
4. Press soft key F3 below the word “chg.”
5. Press soft key F2 below the word “feat.”
6. Press the Function key and then enter the feature code number 64
7. Press soft key F2 below the word “save” to
save selection.

If the code a DIR number then:

1. Keyset is idle or in use on a call.
2. Press the Function key and then dial # 3.
3. Press the feature key you wish to program.
4. Press soft key F3 below the word “chg.”
5. Press soft key F1 below the word “dir.”
6. Enter the resource directory number. (430 et cetera)
7. Press soft key F2 below the word “save” to save the selection.
8. Receive confirmation tone.