Whoops...the CO ports are 6P4C. smile

These will be my thoughts. I'm a former CO technician for an IXC/CLEC so my expertise is on the other end of the line.

Barring any unusual circumstances, I would have no problems running individual cables for each CO line and station port, terminate these cables onto another set of 66 blocks and then crosswire over to the new 66 blocks. You can purchase pre-made harnesses to connect up Partner modules, but, my preference is to run individual cables. 2-pair can be used for COs and stations. Even though Partner phones require only 2 pairs for full functionality, I would run 4-pair and terminate with an 8P8C. Again, my personal preference.

If you click on the link to my website, you'll find some pictures that show how I cabled the Merlin Magix that I donated to my Church.

But...as they say...YMMV. smile



I Love FEATURE 00